Pascal Cleve wrote:
Hi,
I have installed a Pinnacle PCTV card in my Linux box (RH8, Linux
2.4.20). The picture is good, xawtv works, I can change channels, etc,
but I do not have sound. I have the same problem with MythTV.
I tried both card=52 and card=39. I always get a good picture but no
sound.
Jan 30 22:01:18 blackhole kernel: bttv: driver version 0.7.96 loaded
Jan 30 22:01:18 blackhole kernel: bttv: using 4 buffers with 2080k
(8320k total) for capture
Jan 30 22:01:18 blackhole kernel: bttv: Host bridge is Intel Corp. 82860
860 (Wombat) Chipset Host Bridge (MCH)
Jan 30 22:01:18 blackhole kernel: bttv: Bt8xx card found (0).
Jan 30 22:01:18 blackhole kernel: bttv0: Bt878 (rev 17) at 04:0d.0, irq:
17, latency: 64, mmio: 0xf8001000
Jan 30 22:01:18 blackhole kernel: bttv0: detected: Pinnacle PCTV
[card=39], PCI subsystem ID is 11bd:0012
Jan 30 22:01:18 blackhole kernel: bttv0: using: BT878(Pinnacle PCTV
Studio Pr) [card=52,insmod option]
card=52 is wrong and would explain silence.
So
- Don't use any "card=" in modules.conf
- Directly connect active speakers (or headphone) to Line Out
- optionally: upgrade to bttv-0.7.103 (then even tuner will be autodetected)
Does it work?
-