On Tue, Jan 28, 2003 at 03:55:09PM +0100, Gerd Knorr wrote: > cheapisp@xxxxxxxxxxxxx writes: > > > (I have also tried simple=1) > > Can I get that log too? > > > kernel: msp3400: FM-Radio setstereo: mono > > kernel: msp3400: setstereo final source/matrix = 0x0 > > That looks somewhat suspious. There are also some messages missing > (the ones tagged with KERN_DEBUG). Better use 'dmesg' to get the > messages, syslog usually doesn't log the debug level stuff. OK. See below for full(?) logs from dmesg after loading modules and starting the client. simple=0 gives the best result, but there is still a lot of static. (It is now possible to understand a conversation, but that's about it.) I'll be happy to test other bits or add more module options. Dag B [simple=0] options bttv gbuffers=32 radio=1 options msp3400 debug=1 simple=0 options tuner radio_range=88,108 debug=1 [loading modules] btaudio: driver version 0.7 loaded [digital+analog] btaudio: Bt878 (rev 2) at 00:07.1, irq: 18, latency: 64, mmio: 0xdedff000 btaudio: using card config "default" btaudio: registered device dsp1 [digital] btaudio: registered device dsp2 [analog] btaudio: registered device mixer1 bttv: driver version 0.7.103 loaded bttv: using 32 buffers with 2080k (66560k total) for capture bttv: Host bridge is VIA Technologies, Inc. VT8367 [KT266] bttv: Bt8xx card found (0). bttv0: Bt878 (rev 2) at 00:07.0, irq: 18, latency: 64, mmio: 0xdedfe000 bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb bttv0: using: BT878(Hauppauge (bt878)) [card=10,autodetected] bttv0: Hauppauge/Voodoo msp34xx: reset line init [5] i2c-dev.o: Registered 'bt848 #0' as minor 3 i2c-core.o: adapter bt848 #0 registered as adapter 3. bttv0: Hauppauge eeprom: model=61334, tuner=Philips FM1216 (5), radio=yes bttv0: using tuner=5 bttv0: i2c: checking for MSP34xx @ 0x80... found i2c-core.o: driver i2c msp3400 driver registered. msp34xx: setvolume: mute=on 65535:65535 v=0x00 b=0x00 msp34xx: init: chip=MSP3410D-B4 +nicam +simple msp3400: daemon started i2c-core.o: client [MSP3410D-B4] registered to adapter [bt848 #0](pos. 0). bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found tvaudio: TV audio decoder + audio/video mux driver tvaudio: known chips: tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951) i2c-core.o: driver generic i2c audio driver registered. i2c-core.o: driver i2c TV tuner driver registered. tuner: ignoring DDC:fb0 #0 on i2c-matroxfb i2c adapter [id=0x10009] tuner: ignoring DDC:fb0 #1 on i2c-matroxfb i2c adapter [id=0x10009] tuner: ignoring MAVEN:fb0 on i2c-matroxfb i2c adapter [id=0x10009] tuner: probing bt848 #0 i2c adapter [id=0x10005] tuner: chip found @ 0xc2 tuner: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) i2c-core.o: client [Philips PAL_BG (FI1216 and compa] registered to adapter [bt848 #0](pos. 1). msp34xx: AUDC_SET_INPUT(2) msp34xx: scart switch: in1 => 0 msp3400: extern setstereo: stereo msp3400: setstereo final source/matrix = 0x220 bttv0: PLL: 28636363 => 35468950 ..msp3400: thread no carrier scan msp34xx: setvolume: mute=on 65535:65535 v=0x00 b=0x00 ok msp34xx: AUDC_SET_INPUT(4) bttv0: registered device video0 bttv0: registered device vbi0 bttv0: registered device radio0 [radio -f 94.0 -c /dev/v4l/radio0] msp34xx: VIDIOCSFREQ msp34xx: setvolume: mute=on 0:0 v=0x00 b=0x00 tuner: tv freq set to 400.00 tuner: tv 0x1b 0x6f 0x8e 0x90 msp34xx: AUDC_SET_RADIO msp34xx: switching to radio mode msp3400: setmode: 2 msp34xx: setvolume: mute=on 65535:65535 v=0x00 b=0x00 msp34xx: AUDC_SET_INPUT(4) msp34xx: VIDIOCSFREQ msp34xx: setvolume: mute=on 0:0 v=0x00 b=0x00 tuner: radio freq set to 94.00 tuner: radio 0x06 0x8b 0x8e 0xa4 msp34xx: VIDIOCGAUDIO msp34xx: AUDC_SET_INPUT(1) msp34xx: scart switch: in2 => 0 msp3400: FM-Radio setstereo: stereo msp3400: setstereo final source/matrix = 0x20 msp34xx: VIDIOCSAUDIO msp34xx: setvolume: mute=off 65535:65535 v=0x73 b=0x00 msp34xx: setbass: 32768 0x00 msp34xx: settreble: 32768 0x00 msp3400: FM-Radio setstereo: mono msp3400: setstereo final source/matrix = 0x0 msp34xx: VIDIOCGAUDIO msp34xx: AUDC_SET_INPUT(1) msp34xx: VIDIOCSAUDIO msp34xx: setvolume: mute=off 65535:65535 v=0x73 b=0x00 msp34xx: setbass: 32768 0x00 msp34xx: settreble: 32768 0x00 msp3400: FM-Radio setstereo: mono msp3400: setstereo final source/matrix = 0x0 msp34xx: VIDIOCSFREQ msp34xx: setvolume: mute=off 0:0 v=0x00 b=0x00 tuner: radio freq set to 94.00 tuner: radio 0x06 0x8b 0x8e 0xa4 msp34xx: VIDIOCGAUDIO msp3400: thread no carrier scan msp34xx: setvolume: mute=off 65535:65535 v=0x73 b=0x00 msp34xx: VIDIOCGAUDIO msp34xx: VIDIOCGAUDIO msp34xx: VIDIOCGAUDIO msp34xx: VIDIOCGAUDIO msp34xx: VIDIOCGAUDIO msp34xx: VIDIOCGAUDIO msp34xx: VIDIOCGAUDIO msp34xx: VIDIOCGAUDIO [simple=1] options bttv gbuffers=32 radio=1 options msp3400 debug=1 simple=1 options tuner radio_range=88,108 debug=1 [loading modules] btaudio: driver version 0.7 loaded [digital+analog] btaudio: Bt878 (rev 2) at 00:07.1, irq: 18, latency: 64, mmio: 0xdedff000 btaudio: using card config "default" btaudio: registered device dsp1 [digital] btaudio: registered device dsp2 [analog] btaudio: registered device mixer1 bttv: driver version 0.7.103 loaded bttv: using 32 buffers with 2080k (66560k total) for capture bttv: Host bridge is VIA Technologies, Inc. VT8367 [KT266] bttv: Bt8xx card found (0). bttv0: Bt878 (rev 2) at 00:07.0, irq: 18, latency: 64, mmio: 0xdedfe000 bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb bttv0: using: BT878(Hauppauge (bt878)) [card=10,autodetected] bttv0: Hauppauge/Voodoo msp34xx: reset line init [5] i2c-dev.o: Registered 'bt848 #0' as minor 3 i2c-core.o: adapter bt848 #0 registered as adapter 3. bttv0: Hauppauge eeprom: model=61334, tuner=Philips FM1216 (5), radio=yes bttv0: using tuner=5 bttv0: i2c: checking for MSP34xx @ 0x80... found i2c-core.o: driver i2c msp3400 driver registered. msp34xx: setvolume: mute=on 65535:65535 v=0x00 b=0x00 msp34xx: init: chip=MSP3410D-B4 +nicam +simple msp3410: daemon started i2c-core.o: client [MSP3410D-B4] registered to adapter [bt848 #0](pos. 0). bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found tvaudio: TV audio decoder + audio/video mux driver tvaudio: known chips: tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951) i2c-core.o: driver generic i2c audio driver registered. i2c-core.o: driver i2c TV tuner driver registered. tuner: ignoring DDC:fb0 #0 on i2c-matroxfb i2c adapter [id=0x10009] tuner: ignoring DDC:fb0 #1 on i2c-matroxfb i2c adapter [id=0x10009] tuner: ignoring MAVEN:fb0 on i2c-matroxfb i2c adapter [id=0x10009] tuner: probing bt848 #0 i2c adapter [id=0x10005] tuner: chip found @ 0xc2 tuner: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) i2c-core.o: client [Philips PAL_BG (FI1216 and compa] registered to adapter [bt848 #0](pos. 1). msp34xx: AUDC_SET_INPUT(2) msp34xx: scart switch: in1 => 0 msp3400: extern setstereo: stereo msp3400: setstereo final source/matrix = 0x220 bttv0: PLL: 28636363 => 35468950 ..msp3410: thread no carrier scan msp34xx: setvolume: mute=on 65535:65535 v=0x00 b=0x00 ok msp34xx: AUDC_SET_INPUT(4) bttv0: registered device video0 bttv0: registered device vbi0 bttv0: registered device radio0 [radio -f 98.2 -c /dev/v4l/radio0] msp34xx: VIDIOCSFREQ msp34xx: setvolume: mute=on 0:0 v=0x00 b=0x00 tuner: tv freq set to 400.00 tuner: tv 0x1b 0x6f 0x8e 0x90 msp34xx: AUDC_SET_RADIO msp34xx: switching to radio mode msp34xx: setvolume: mute=on 0:0 v=0x00 b=0x00 msp34xx: AUDC_SET_INPUT(4) msp34xx: VIDIOCSFREQ msp34xx: setvolume: mute=on 0:0 v=0x00 b=0x00 tuner: radio freq set to 98.18 tuner: radio 0x06 0xce 0x8e 0xa4 msp34xx: VIDIOCGAUDIO msp34xx: AUDC_SET_INPUT(1) msp34xx: scart switch: in2 => 0 msp3400: FM-Radio setstereo: stereo msp3400: setstereo final source/matrix = 0x20 msp34xx: VIDIOCSAUDIO msp34xx: setvolume: mute=off 65535:65535 v=0x73 b=0x00 msp34xx: setbass: 32768 0x00 msp34xx: settreble: 32768 0x00 msp3400: FM-Radio setstereo: mono msp3400: setstereo final source/matrix = 0x0 msp34xx: VIDIOCGAUDIO msp34xx: AUDC_SET_INPUT(1) msp34xx: VIDIOCSAUDIO msp34xx: setvolume: mute=off 65535:65535 v=0x73 b=0x00 msp34xx: setbass: 32768 0x00 msp34xx: settreble: 32768 0x00 msp3400: FM-Radio setstereo: stereo msp3400: setstereo final source/matrix = 0x20 msp34xx: VIDIOCSFREQ msp34xx: setvolume: mute=off 0:0 v=0x00 b=0x00 tuner: radio freq set to 98.18 tuner: radio 0x06 0xce 0x8e 0xa4 msp34xx: VIDIOCGAUDIO msp3410: setting mode: 10.7 FM-Stereo Radio (0x0040) msp3410: current mode: 10.7 FM-Stereo Radio (0x0040) msp3400: setmode: 2 msp34xx: scart switch: in2 => 0 msp34xx: setbass: 32768 0x00 msp34xx: settreble: 32768 0x00 msp34xx: setvolume: mute=off 65535:65535 v=0x73 b=0x00 msp34xx: VIDIOCGAUDIO msp34xx: VIDIOCGAUDIO msp34xx: VIDIOCGAUDIO msp34xx: VIDIOCGAUDIO msp34xx: VIDIOCGAUDIO msp34xx: VIDIOCGAUDIO msp34xx: VIDIOCGAUDIO msp34xx: VIDIOCGAUDIO msp34xx: VIDIOCGAUDIO msp34xx: VIDIOCGAUDIO msp34xx: VIDIOCGAUDIO msp34xx: VIDIOCGAUDIO msp34xx: VIDIOCGAUDIO msp34xx: VIDIOCGAUDIO msp34xx: VIDIOCGAUDIO msp34xx: VIDIOCGAUDIO msp34xx: VIDIOCGAUDIO msp34xx: VIDIOCGAUDIO msp34xx: VIDIOCGAUDIO msp34xx: VIDIOCGAUDIO msp34xx: VIDIOCGAUDIO msp34xx: VIDIOCGAUDIO msp34xx: VIDIOCGAUDIO msp34xx: VIDIOCGAUDIO msp34xx: VIDIOCGAUDIO
