Darren Mak wrote:
Hi there,
I am relatively new to Linux and am trying to get a tuner card
installed.
Whats the problem exactly?
The logs look fine.
It is the Leadtek Winfast tv2000xp deluxe card.
My video card is an ATI All in Wonder.
I am in Canada and have cable.
I have tried Mandrake 9 and Redhat 8 distributions and just cannot seem
to get it to work.
I have read as much as I can on v4l, bttv, xawtv etc and am probably
really close but seem to be missing something.
Included below are the contents of config files etc.
From dmesg: (edited)
Linux version 2.4.19-16mdk (quintela@xxxxxxxxxxxxxxxxxxx) (gcc version
3.2 (Mandrake Linux 9.0 3.2-1mdk)) #1 Fri Sep 20 18:15:05 CEST 2002
256MB LOWMEM available.
Initializing CPU#0
Detected 451.027 MHz processor.
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU: Intel Pentium III (Katmai) stepping 03
Linux video capture interface: v1.00
i2c-core.o: i2c core module version 2.6.4 (20020719)
i2c-algo-bit.o: i2c bit algorithm module version 2.6.4 (20020719)
bttv: driver version 0.7.96 loaded
bttv: using 4 buffers with 2080k (8320k total) for capture
bttv: Host bridge is Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge
bttv: Host bridge needs ETBF enabled.
bttv: Bt8xx card found (0).
PCI: Found IRQ 9 for device 00:09.0
PCI: Sharing IRQ 9 with 00:09.1
PCI: Sharing IRQ 9 with 00:0f.0
bttv0: Bt878 (rev 17) at 00:09.0, irq: 9, latency: 32, mmio: 0xd6001000
bttv0: detected: Leadtek WinFast TV 2000 [card=34], PCI subsystem ID is
107d:660
6
bttv0: using: BT878(Leadtek WinFast 2000/ W) [card=34,insmod option]
bttv0: enabling ETBF (430FX/VP3 compatibilty)
bttv0: using tuner=5
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
tuner: probing bt848 #0 i2c adapter [id=0x10005]
tuner: chip found @ 0xc2
bttv0: i2c attach [client=Philips NTSC (FI1236 and compati,ok]
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: registered device radio0
tvaudio: TV audio decoder + audio/video mux driver
tvaudio: known chips:
tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea642
0,tda8425,pic16c54 (PV951)
/etc/modules.conf
alias eth0 8139too
options bttv card=34 radio=1
options tuner type=2
above snd-emu10k1 snd-pcm-oss
alias sound-slot-0 snd-emu10k1
probeall usb-interface usb-uhci
/etc/modules
bttv
tvaudio
I tried updating bttv drivers, v4l, kernel etc with no luck.
Hope someone can help me.
Darren
--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request@xxxxxxxxxx?subject=unsubscribe
https://listman.redhat.com/mailman/listinfo/video4linux-list
