-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I've been trying to get my Captivator Pro board (no tuner, Philips composite camera) to work with V4L, with some difficulties. I'm able to get video from the camera, but the video freezes up after a minute or two at the most. I've had varying degrees of success setting the card to type 0 (*** UNKNOWN/GENERIC ***), 4 (Intel Create and Share PCI/Smart Video Recorder III), 32 (Intel Create and Share PCI/Smart Video Recorder III) and 57 (GrandTec 'Grand Video Capture' [BT848]). Some last longer than others, but the end result is that I get some kind of synchronization error and the picture freezes up on me. The biggest difference that I'm noticing is that cards 4 and 32 don't seem to be loading the tuner module, whereas most other card settings do, even though there's not tuner. Ending the application, be it GnomeMeeting, XawTV, or any other is the only way to reset the line, but that's usually not an issue since the capture doesn't freeze the system, just the picture. Right now, my 2.4.20 kernel module options look like this: <--- CODE BEGIN ---> # I2C alias char-major-89 i2c-dev options i2c-core i2c_debug=1 options i2c-algo-bit bit_test=1 # TV alias char-major-81 videodev alias char-major-81-0 bttv options bttv card=32 radio=0 pll=0 options tuner type=4 <--- CODE END ---> I haven't been able to glean much information off of the mailing list, so I wanted to know if anybody had the "definitive" modules.conf settings for this card, or should I just sit on my hands until V4L2 or another alternative makes it's way into the stable kernel? Tim -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (GNU/Linux) iD8DBQE+Im/whf3jBgWtj6gRAmdHAJ9gBjkICI9xcm0qur6hTf9W+Lvk0ACgyHdV fMFPnMgDYGPovT3/AFpUx/E= =zNXl -----END PGP SIGNATURE-----
