Ok, I've tried getting this working for about 50 hours so I think
it's time I asked someone for help.
I have a LifeView FlyVideo 2000 and when I try a modprobe bttv card=65 all
I get is the dreaded
/lib/modules/2.4.18/kernel/drivers/media/video/bttv.o: init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters
/lib/modules/2.4.18/kernel/drivers/media/video/bttv.o: insmod /lib/modules/2.4.18/kernel/drivers/media/video/bttv.o failed
/lib/modules/2.4.18/kernel/drivers/media/video/bttv.o: insmod bttv failed
of death.
In my syslog I get
Sep 24 16:41:52 zuul kernel: Linux video capture interface: v1.00
Sep 24 16:41:52 zuul kernel: i2c-algo-bit.o: i2c bit algorithm module
Sep 24 16:41:52 zuul kernel: bttv: driver version 0.7.83 loaded
Sep 24 16:41:52 zuul kernel: bttv: using 2 buffers with 2080k (4160k total) for capture
Sep 24 16:41:52 zuul kernel: bttv: Host bridge is Intel Corp. 440BX/ZX - 82443BX/ZX Host bridge
Sep 24 16:41:52 zuul kernel: bttv: Host bridge needs ETBF enabled.
My lsmod output if it helps somehow:
Module Size Used by Not tainted
tuner 8036 0 (unused)
i2c-core 12768 0 [tuner]
sr_mod 11736 0 (autoclean)
nls_iso8859-1 2848 2 (autoclean)
apm 9116 0 (unused)
ide-scsi 7360 0
scsi_mod 87352 2 [sr_mod ide-scsi]
v_midi 4992 0 (unused)
sb 7360 0
sb_lib 32192 0 [sb]
uart401 6080 0 [sb_lib]
sound 53260 0 [v_midi sb_lib uart401]
ntfs 48576 2
vfat 9276 0 (unused)
fat 29112 0 [vfat]
8139too 14464 1
and the relevant lspci output:
00:0c.0 Multimedia controller: Philips Semiconductors: Unknown device 7130 (rev 01)
Subsystem: Philips Semiconductors: Unknown device 0000
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (3750ns min, 9500ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at df000000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [40] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Please help. I'm tired of booting winblows just to to something trivial like watch The Simpsons.
Thanks.
