Tried it.. no help, no sound. But I'm sure it'll arrive in 3-4 days as usual :) On Sun, Sep 22, 2002 at 04:26:03PM +1000, Barrie wrote: > Jozsa, > > You could try the mixer setting. I had to set mine to 2 to get it working. > > My modules.conf for the saa7134 is > > pre-install saa7134 modprobe -k tuner;modprobe -k tda9887 > post-remove saa7134 modprobe -r tuner;modprobe -r tda9887 > options saa7134 card=2 mixer_nr=2 > > > Cheers, Barrie > > > Hi, > > I'm glad it's not only me suffering with the flyvideo3k's sound problem. I'd > like to mention an additional piece of info which *might* help debugging > the problem. It's kinda voodoo right again, but is reproducable. I still > don't get any sound when using from xawtv, but I do get proper sound from > the tvcard following the steps: > > 1. modprobe saa7134 card=2 > 2. start xawtv, and exit > 3. rmmod saa7134 > 4. modprobe saa7134 card=3 (yep, i know that's for flyvideo2k) > > At this point I hear the sound of the last tuned tv channel, but as soon as > I start xawtv, the sound is gone right again. I were unable to get any sound > while xawtv is running, nor with loading the saa7134 driver with the right > settings for my card (card=2).. > > I'd do anything (ok, almost anything ;) to help track down this problem. If > any developer could jump in debugging the problem, please mail me some > instructions to try out on my config, I'll answer ASAP with the results. > > Best regards, > Christopher Jozsa > > ps. my config is: gentoo linux, kernel 2.4.19 patched with gentoo stuff, > v4l2 and saa7134 0.1.10 (i've tried the 3 previous driver versions as well) > > ps2. xawtv, sound from flyvideo3k still works on my old debian box without a > hitch(!), so I guess the cabeling and mixer settings are correct > > > > > > > _______________________________________________ > Video4linux-list mailing list > Video4linux-list@xxxxxxxxxx > https://listman.redhat.com/mailman/listinfo/video4linux-list -- .Digital.Yearning.for.Networked.Assassination.and.Xenocide
