--- Wesley J Landaker <wjl@xxxxxxxxxxxxx> wrote: > On Saturday 07 September 2002 12:08 pm, Gunther > Mayer wrote: > > Hi, > > this patch makes the PAL variant work perfectly > (NTSC and SECAM > > should work, but untested). The missing point was, > we need to set OP2 > > on TDA9886, else MT2032 would be disabled after > loading tda9887.o > > (thanks to Barry for pinpointing this failure > mode). > > > With this patch everything will work > out-of-the-box (modulo bugs:-) > > - MT2032 is detected automatically > > - tda9885/6 is detected and module is loaded > automatically > > - Pal/Secam/Ntsc will automatically follow your > selection in xawtv > > Wow, great work, Gunther! I had started to poke > around at the TDA9885 > myself, but you've already got it integrated! > > I tried applying this patch, and indeed, it does fix > quite a lot of the > problems I was seeing. Now autodetection seems to be > working great and > contact with the MT2032 no longer drops out. =) > > Unfortunately, I'm still not getting sound. I'm > seeing the same behavior > as I did the last time, where only video comes in, > but if I use xawtv > "fine-tune" to about (9) or (10), sound comes (of > course, accompanied > by fuzzy video ;) Hmm, just tried finetuning and I experience the same thing. I get sound when i finetune to 12+ > > I'm using NTSC here in the US, using us-cable as the > tuner setting. Any > ideas? Is there anything else I should try? Can I > provide more > information that would be helpful? > > -- > Wesley J. Landaker - wjl@xxxxxxxxxxxxx > OpenPGP FP: C99E DF40 54F6 B625 FD48 B509 A3DE 8D79 > 541F F830 > > > > > _______________________________________________ > Video4linux-list mailing list > Video4linux-list@xxxxxxxxxx > https://listman.redhat.com/mailman/listinfo/video4linux-list __________________________________________________ Do You Yahoo!? Yahoo! Finance - Get real-time stock quotes http://finance.yahoo.com
