Hi! i'm trying to install a Prolink PixelView tv-tuner. It's not working yet. Here's what is happening: Linux 2.4.18 videodevX-20020330.tgz Jun 22 16:48:25 remix kernel: Video for Linux One (2.2.16). Major device: 81 Jun 22 16:48:25 remix kernel: Video for Linux Two (V0.20). Major device: 81 Jun 22 16:48:25 remix kernel: bttv: driver version 0.7.93 loaded Jun 22 16:48:25 remix kernel: bttv: using 4 buffers with 2080k (8320k total) for capture Jun 22 16:48:25 remix kernel: bttv: Host bridge is PCI device 1106:3101 (VIA Technologies, Inc.) Jun 22 16:48:25 remix kernel: bttv: Bt8xx card found (0). Jun 22 16:48:25 remix kernel: bttv0: Bt878 (rev 17) at 00:09.0, irq: 11, latency: 32, mmio: 0xde002000 Jun 22 16:48:25 remix kernel: bttv0: using: BT878(Prolink Pixelview PlayT) [card=16,insmod option] Jun 22 16:48:25 remix kernel: i2c-dev.o: Registered 'bt848 #0' as minor 0 Jun 22 16:48:25 remix kernel: i2c-core.o: adapter bt848 #0 registered as adapter 0. Jun 22 16:48:25 remix kernel: bttv0: using tuner=-1 Jun 22 16:48:25 remix kernel: bttv0: i2c: checking for MSP34xx @ 0x80... not found Jun 22 16:48:25 remix kernel: bttv0: i2c: checking for TDA9875 @ 0xb0... not found Jun 22 16:48:25 remix kernel: bttv0: i2c: checking for TDA7432 @ 0x8a... not found Jun 22 16:48:25 remix kernel: tvaudio: TV audio decoder + audio/video mux driver Jun 22 16:48:25 remix kernel: tvaudio: known chips: tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951) Jun 22 16:48:25 remix kernel: i2c-core.o: driver generic i2c audio driver registered. Jun 22 16:48:25 remix kernel: i2c-core.o: driver i2c TV tuner driver registered. Jun 22 16:48:25 remix kernel: tuner: probing bt848 #0 i2c adapter [id=0x10005] Jun 22 16:48:25 remix kernel: tuner: chip found @ 0xc2 Jun 22 16:48:25 remix kernel: bttv0: i2c attach [client=(unset),ok] Jun 22 16:48:25 remix kernel: i2c-core.o: client [(unset)] registered to adapter [bt848 #0](pos. 0). Jun 22 16:48:25 remix kernel: bttv0: registered device video0 Jun 22 16:48:25 remix kernel: bttv0: registered device vbi0 Jun 22 16:48:51 remix kernel: bttv0: PLL: 28636363 => 35468950 ... ok remix:/usr/src# lsmod Module Size Used by Not tainted tuner 8228 1 (autoclean) tvaudio 11040 0 (autoclean) (unused) bttv 66336 0 videodevX 13760 2 [bttv] snd-card-cmipci 14528 0 snd-pcm 47328 0 [snd-card-cmipci] snd-opl3 5184 0 [snd-card-cmipci] snd-hwdep 3584 0 [snd-opl3] snd-timer 10016 0 [snd-pcm snd-opl3] snd-mpu401-uart 2496 0 [snd-card-cmipci] snd-rawmidi 12032 0 [snd-mpu401-uart] snd-seq-device 3792 0 [snd-opl3 snd-rawmidi] snd 24680 0 [snd-card-cmipci snd-pcm snd-opl3 snd-hwdep snd-timer snd-mpu401-uart snd-rawmidi snd-seq-device] But when i try xcaptest from the v4l2 page, i get: joshua@remix:~/v4lapp$ ./xcaptest /dev/video0 QUERYCAP in capture_init: Invalid argument called v4l2_set_fps with fps=30 time per frame is: 0 time per frame is: 333667 time per frame is: 0 G_STD in capture_start: Invalid argument G_FMT in capture_start: Invalid argument REQBUFS in capture _start : Invalid argument Also, xawtv only shows static even though the cable in plugged into the capture card. Any clue what to try? Thanks ... -- Victory to the Divine Mother!! after all, http://sahajayoga.org http://why-compete.org
