Hi,
I'm a bttv newbie with a problem...
I can't get out of my bttv card nothing but a noisy screen (no tv signal I
think).
In my /var/log/messages I took "bttv: readee error" and " bttv0: Hauppauge
eeprom: invalid", what does they mean?
Thanks.
Christian
P.S.: More in depth specification follow.
Card specs
Hauppauge WinTV (PAL B/G D421 - 61344 Rev D421)
chips: CONEXANT FUSION 878A (25878-13 Korea)
MICRONAS MSP3415DA2
PIC16C54C 20/90
System specs
Linux RedHat 7.2
Kernel 2.4.18 on an i686
PC IBM NetVista
Pentium 4 - 1.6 Ghz
Videocard nVidia Vanta 16
Xfree86 4.1.0
Driver version
bttv 0.7.83
xawtv specs
Version 3.54 and 3.74
TV norm: PAL
Video source: Television
Freq.table: italy
Capture: overlay
lsmod
Module Size Used by
tuner 8304 0 (autoclean) (unused)
tvaudio 9776 0 (autoclean) (unused)
bttv 58416 0
i2c-algo-bit 7040 0 [bttv]
i2c-core 13152 0 [tuner tvaudio bttv i2c-algo-bit]
videodev 4800 2 [bttv]
insmod + xawtv messages
[/var/log/messages]
...
May 20 17:47:01 xxxxxxx kernel: Linux video capture interface: v1.00
May 20 17:47:13 xxxxxxx kernel: i2c-core.o: i2c core module
May 20 17:47:13 xxxxxxx kernel: i2c-algo-bit.o: i2c bit algorithm module
May 20 17:47:13 xxxxxxx kernel: bttv: driver version 0.7.83 loaded
May 20 17:47:13 xxxxxxx kernel: bttv: using 2 buffers with 2080k (4160k
total) for capture
May 20 17:47:13 xxxxxxx kernel: bttv: Host bridge is Intel Corp. 82845 845
(Brookdale) Chipset Host Bridge
May 20 17:47:13 xxxxxxx kernel: bttv: Bt8xx card found (0).
May 20 17:47:13 xxxxxxx kernel: PCI: Found IRQ 5 for device 02:0d.0
May 20 17:47:13 xxxxxxx kernel: PCI: Sharing IRQ 5 with 02:0d.1
May 20 17:47:13 xxxxxxx kernel: bttv0: Bt878 (rev 17) at 02:0d.0, irq: 5,
latency: 132, memory: 0xfb000000
May 20 17:47:13 xxxxxxx kernel: bttv0: using: BT878(Hauppauge (bt878))
[card=10,insmod option]
May 20 17:47:13 xxxxxxx kernel: bttv0: Hauppauge/Voodoo msp34xx: reset line
init [5]
May 20 17:47:13 xxxxxxx kernel: i2c-algo-bit.o: Adapter: bt848 #0 scl: 0
sda: 0 -- testing...
May 20 17:47:13 xxxxxxx kernel: i2c-algo-bit.o: bt848 #0 seems to be busy.
May 20 17:47:15 xxxxxxx kernel: bttv: readee error
May 20 17:47:15 xxxxxxx kernel: bttv0: Hauppauge eeprom: invalid
May 20 17:47:15 xxxxxxx kernel: bttv0: Hauppauge eeprom: model=0, tuner= (4),
radio=no
May 20 17:47:15 xxxxxxx kernel: tvaudio: TV audio decoder + audio/video mux
driver
May 20 17:47:15 xxxxxxx kernel: tvaudio: known chips:
tda9840,tda9873h,tda9874a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54
(PV951)
May 20 17:47:15 xxxxxxx kernel: i2c-core.o: driver generic i2c audio driver
registered.
May 20 17:47:15 xxxxxxx kernel: i2c-core.o: driver i2c TV tuner driver
registered.
May 20 17:47:49 xxxxxxx kernel: bttv0: PLL: 28636363 => 35468950 ... ok
May 20 17:50:15 xxxxxxx kernel: bttv0: PLL: switching off
May 20 17:50:21 xxxxxxx kernel: bttv0: PLL: 28636363 => 35468950 ... <7>VFS:
Disk change detected on device ide1(22,0)
May 20 17:50:21 xxxxxxx kernel: ok
...
