Hmm, We have the exact same card (although my card is FlyVideo 2000) according to your lspci output - so this is what I have put on my /etc/modules.conf... alias char-major-81 videodev alias char-major-81-0 bttv options bttv card=65 radio=0 tuner=5 pll=1 options tuner debug=0 However - I think I might be missing something (btaudio) as I can record sounds after running xawtv -no-xv mode, but with programs like ffmpeg I can't record sound... Regarding the tuner - I live here in Israel so our broadcast is PAL, so you might need to change the tuner and the pll.. Could some soul tell me where to load the btaudio and what options it got? Hetz On Sunday 12 May 2002 00:39, Hugo van der Merwe wrote: > Hello, > > A friend is continually bugging me to get his sound working as well > (I've got his video working a while back). Thing is, as it is not my > own and I'm quite busy, I am not prepared to spend much more time > learning about all the workings of the V4L modules, etc. > > I am hoping someone on this list can quickly point me in the right > direction. > > Here is what I believe to be relevant output of lspci: > > 00:03.0 Multimedia video controller: Brooktree Corporation Bt878 (rev 11) > 00:03.1 Multimedia controller: Brooktree Corporation Bt878 (rev 11) > > 00:03.0 Class 0400: 109e:036e (rev 11) > 00:03.1 Class 0480: 109e:0878 (rev 11) > > On the card itself, I was able to read the following, of chipsets etc. > (OK, here I'm going completely over the top, don't know what's really > relevant): > > LG > TAPC-I001P > > Conexant > Fusion 878A > 25878-13 > E88433.1 > 0042 Korea <g> > > HEF4052BT > D2082pl > Hnn0018 6 > > LVA001 > 0028GD1 > > LR50 REV:W > > Can't even remember exactly where on the card I read what. > > My current settings are: > > options bttv card=39 > options tuner type=37 > > Got these with a little trial and error. I tried loading msp3400 before > loading anything else, and I also loaded tvmixer - what should this do? > I hoped to see another mixer device appear in /dev (devfs...) > > Relevant dmesg output for how it is currently set up... might that irq > sharing be a problem? 00:03.* I have shown above. 01:00.0 is: > > 01:00.0 VGA compatible controller: nVidia Corporation Vanta [NV6] (rev 15) > > > i2c-core.o: i2c core module > i2c-core.o: driver i2c msp3400 driver registered. > i2c-core.o: driver i2c TV tuner driver registered. > Linux video capture interface: v1.00 > i2c-algo-bit.o: i2c bit algorithm module > bttv: driver version 0.7.83 loaded > bttv: using 2 buffers with 2080k (4160k total) for capture > bttv: Host bridge is VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] > bttv: Bt8xx card found (0). > PCI: Found IRQ 3 for device 00:03.0 > PCI: Sharing IRQ 3 with 00:03.1 > PCI: Sharing IRQ 3 with 01:00.0 > bttv0: Bt878 (rev 17) at 00:03.0, irq: 3, latency: 66, memory: 0x44000000 > bttv0: using: BT878(Pinnacle PCTV Studio/Ra) [card=39,insmod option] > tuner: chip found @ 0xc2 > bttv0: i2c attach [client=LG PAL (newer TAPC series),ok] > i2c-core.o: client [LG PAL (newer TAPC series)] registered to adapter > [bt848 #0](pos. 0). i2c-core.o: adapter bt848 #0 registered as adapter 0. > bttv0: i2c: checking for MSP34xx @ 0x80... not found > bttv0: miro: id=31 tuner=4 radio=matchbox stereo=no > bttv0: i2c: checking for MSP34xx @ 0x80... not found > bttv0: i2c: checking for TDA9875 @ 0xb0... not found > bttv0: i2c: checking for TDA7432 @ 0x8a... not found > tvaudio: TV audio decoder + audio/video mux driver > tvaudio: known chips: > tda9840,tda9873h,tda9874a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 > (PV951) i2c-core.o: driver generic i2c audio driver registered. > i2c-core.o: driver tv card mixer driver registered. > tvmixer: debug: LG PAL (newer TAPC series) > > > Thanks, > Hugo van der Merwe > > > > _______________________________________________ > Video4linux-list mailing list > Video4linux-list@xxxxxxxxxx > https://listman.redhat.com/mailman/listinfo/video4linux-list
