Hello, A friend is continually bugging me to get his sound working as well (I've got his video working a while back). Thing is, as it is not my own and I'm quite busy, I am not prepared to spend much more time learning about all the workings of the V4L modules, etc. I am hoping someone on this list can quickly point me in the right direction. Here is what I believe to be relevant output of lspci: 00:03.0 Multimedia video controller: Brooktree Corporation Bt878 (rev 11) 00:03.1 Multimedia controller: Brooktree Corporation Bt878 (rev 11) 00:03.0 Class 0400: 109e:036e (rev 11) 00:03.1 Class 0480: 109e:0878 (rev 11) On the card itself, I was able to read the following, of chipsets etc. (OK, here I'm going completely over the top, don't know what's really relevant): LG TAPC-I001P Conexant Fusion 878A 25878-13 E88433.1 0042 Korea <g> HEF4052BT D2082pl Hnn0018 6 LVA001 0028GD1 LR50 REV:W Can't even remember exactly where on the card I read what. My current settings are: options bttv card=39 options tuner type=37 Got these with a little trial and error. I tried loading msp3400 before loading anything else, and I also loaded tvmixer - what should this do? I hoped to see another mixer device appear in /dev (devfs...) Relevant dmesg output for how it is currently set up... might that irq sharing be a problem? 00:03.* I have shown above. 01:00.0 is: 01:00.0 VGA compatible controller: nVidia Corporation Vanta [NV6] (rev 15) i2c-core.o: i2c core module i2c-core.o: driver i2c msp3400 driver registered. i2c-core.o: driver i2c TV tuner driver registered. Linux video capture interface: v1.00 i2c-algo-bit.o: i2c bit algorithm module bttv: driver version 0.7.83 loaded bttv: using 2 buffers with 2080k (4160k total) for capture bttv: Host bridge is VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] bttv: Bt8xx card found (0). PCI: Found IRQ 3 for device 00:03.0 PCI: Sharing IRQ 3 with 00:03.1 PCI: Sharing IRQ 3 with 01:00.0 bttv0: Bt878 (rev 17) at 00:03.0, irq: 3, latency: 66, memory: 0x44000000 bttv0: using: BT878(Pinnacle PCTV Studio/Ra) [card=39,insmod option] tuner: chip found @ 0xc2 bttv0: i2c attach [client=LG PAL (newer TAPC series),ok] i2c-core.o: client [LG PAL (newer TAPC series)] registered to adapter [bt848 #0](pos. 0). i2c-core.o: adapter bt848 #0 registered as adapter 0. bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: miro: id=31 tuner=4 radio=matchbox stereo=no bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found tvaudio: TV audio decoder + audio/video mux driver tvaudio: known chips: tda9840,tda9873h,tda9874a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951) i2c-core.o: driver generic i2c audio driver registered. i2c-core.o: driver tv card mixer driver registered. tvmixer: debug: LG PAL (newer TAPC series) Thanks, Hugo van der Merwe
