Hi Matthias, On Mon, 6 May 2002, Matthias Dahl wrote: > > Ok, just made a first step in the direction of a possible fix. I searched > through the mailinglist archive and found a mail by Wan Tat Chee who suggest > to someone with similar problems that he should change: > > aumux: TV > to > aumux: LINE2 > That was a long shot when I suggested it.... we've since discovered that it wasn't/shouldn't be the problem. > in saa7134-cards.c in the FLYVIDEO3000 section. I have done that and I get > the following result: sound works for both, TV and radio *but* there are some > strange side effects: > > * audio is activated as soon as the saa7134 module is being loaded > * audio cannot be muted with xawtv or gnomeradio > * audio in TV mode is only *mono* whereas the radio is stereo... changing > the mode in xawtv has no effect... *panic* > * audio volume is very faint - I have to bring up the volume of my line in > to 100%... using the mixer device of the saa7134 doesn't work well too, > because if I try to change the values, the slider just jumps to 100% and > doesn't move a bit anymore... no matter with what tool I try it. :((( > Please post some dmesg output (with debug_audio=1). > And there are also two picture problems: > > * using the v4l support of X, my matrox card should scale the image up to the > current resolution - when I try that, the image is indeed scaled to the max > but it has the wrong aspect ratio (the image is squeezed in width and has a > corrupted bar right next to the picture) Can you try 'xawtv -noxv' and see if it makes any difference? > > * grabdisplay in xawtv doesn't work at all - does that mean, grabbing is not > possible at the moment at all? > It only works in '-noxv' mode. Read the docs. ---- Wan Tat Chee (Lecturer) School of Computer Science, Univ. Science Malaysia, 11800 Minden, Penang, Malaysia. Ofc Ph: +604 657-7888 x 3617 Internet: tcwan@xxxxxxxxx Web: http://nrg.cs.usm.my/~tcwan GPG Key : http://nrg.cs.usm.my/~tcwan/tcw_gpg.asc F'print : FB0F CED7 85A5 ECF9 DEF0 50E8 A550 A0D2 8638 B1EB