> That's interesting... I don't know anything about your version of the > FlyVideo2000 :( Life's fun when marketoids play fast and loose with > model names and numbers. 02:0e.0 Multimedia video controller: Brooktree Corporation Bt878 (rev 11) 02:0e.1 Multimedia controller: Brooktree Corporation Bt878 (rev 11) Nothing special about this device: 02:0e.0 Class 0400: 109e:036e (rev 11) 02:0e.1 Class 0480: 109e:0878 (rev 11) > > > > The bug goes like this - if I load xawtv - I see picture but no > > > > audio, switching to another channel - gives sound back, but programs > > > > who use bttv to capture etc simply record silent in the video capture > > > > (with or without the btaudio module).. > > > > > > try 'xawtv -noxv'. I think the 2.4.19 version of the kernel has v4l2 > > > merged into the kernel and it behaves differently when accessed via Xv > > > instead of directly. > > > > no v4l2 module is loaded when I'm using Xawtv - either with 2.4.9-31 or > > with 2.4.19-pre5 > > Did you try using 'xawtv -noxv' though? No effect? Nop, no effect.. > Also, what is your version of xawtv? xawtv --help This is xawtv-3.54, running on Linux/i686 (2.4.9-31) > I think you'd need to enable debug mode (via insmod/modprobe options, > or in /etc/modules.conf) and post some output from dmesg. I'm not familiar > with the bttv driver so you'll have to dig around for the right > parameters. My parameters works great on 2.4.9-31 and with previous kernel versions (2.4.18 for example): alias char-major-81 videodev alias char-major-81-0 bttv options bttv card=65 radio=0 tuner=5 pll=1 options tuner debug=0 Hope this helps you.. Hetz
