Gunther Mayer wrote:
Wan Tat Chee wrote:
Tat Chee, earlier you wrote your tuner is TCL2002BM-1 and you usw LG_PAL_NEW_TAPC(tuner=37).
(can you re-check if it reads "...MB" or really "...BM"?)
Do you have the optional remote control (e.g. LVA001 microcontroller above saa713x)?
My FV3K (w/FM w/IR Tuner:TCL2002MB-1F) has:
saa7130/34: v4l2 driver version 0.1.5 loaded
saa7134[0]: found at 00:11.0, rev: 1, irq: 5, latency: 32, mmio: 0xe4000000
saa7134[0]: subsystem: 1131:0000, board: LifeView FlyVIDEO3000
saa7134 initial gpio_mode = 00000000
saa7134: initial gpio_state = 00031000
Here PHILIPS_PAL(tuner=5) works fine.
So it seems these TCL2002MB tuners come in different flavours.
Gerd, can you apply the GPIO printk patch ?
I modified Tat Chee's patch to unconditionally print the info, we can make
this silent (i.e. dprintk) later, when we have enough data !
Robert, you reported you have a FV3000 and use tuner=37. Can you apply this patch,
as I would be very interested in your GPIO (and wether you have FM and remote control chip).
I have had a look at the hardware of my card, the PCB is labelled LA158
Rev C. It has a TCL2002(S?)MB-1 tuner (I thought it said had S in there
when I looked, but reading your emails has confused me....). I have
remote control and the chip LVA001 (but I haven't actually got it
working yet - is it supported or is there tricks I have to do?).
I also have the HEF-4052BT chip. I do not have FM, and there is a
footprint on the board for the chips SBX1673 or SBX1637, but this is not
populated.
My modprobe suffers from the same problem as Tat Chee, Mar 24 21:33:52
phobos kernel: saa7134[0]: i2c eeprom read error #1 rc=-5
#modprobe tuner type=37
#modprobe saa7134
gives the following in dmesg:
i2c-core.o: driver i2c TV tuner driver registered.
saa7130/34: v4l2 driver version 0.1.4 loaded
PCI: Found IRQ 10 for device 02:03.0
saa7134[0]: found at 02:03.0, rev: 1, irq: 10, latency: 32, mmio: 0xdf001000
saa7134[0]: subsystem: 1131:0000, board: LifeView FlyVIDEO3000
tuner: probing saa7134[0] i2c adapter [id=0x90000]
saa7134[0]/video: DCSDT: no signal
tuner: chip found @ 0xc2
i2c-core.o: client [LG PAL (newer TAPC series)] registered to adapter
[saa7134[0]](pos. 0).
i2c-core.o: adapter saa7134[0] registered as adapter 0.
saa7134[0]: i2c eeprom read error #1 rc=-5
saa7134[0]: registered device video0
saa7134[0]: registered device vbi0
saa7134[0]: registered device radio0
saa7134[0]: registered device dsp4
saa7134[0]: registered device mixer2
saa7134[0]/video: DCSDT: no signal
I am a bit confused with the state of all the patches that we've thrown
around the list lately, what is the recommended combination?
Robert
Marco, your data would be valuable, too.
Regards, Gunther
