Wan Tat Chee wrote: > > On Sat, 23 Mar 2002, Wan Tat Chee wrote: > > > As for Probing the GPIO inputs, Here's a small patch (disabled by default) > > that should do the job (I was wondering why there was a non-zero > > input value on the GPIO status lines). Note: I've modified it from > > my earlier source which used the saa_readb() macro, I hope it works :). ... > Datapoint: My FV2K indicates: > saa7130[0]/video: DEBUG: INITIAL gpio_mode = 00006000 > saa7130[0]/video: DEBUG: INITIAL gpio_state = 00030500 Tat Chee, earlier you wrote your tuner is TCL2002BM-1 and you usw LG_PAL_NEW_TAPC(tuner=37). (can you re-check if it reads "...MB" or really "...BM"?) Do you have the optional remote control (e.g. LVA001 microcontroller above saa713x)? My FV3K (w/FM w/IR Tuner:TCL2002MB-1F) has: saa7130/34: v4l2 driver version 0.1.5 loaded saa7134[0]: found at 00:11.0, rev: 1, irq: 5, latency: 32, mmio: 0xe4000000 saa7134[0]: subsystem: 1131:0000, board: LifeView FlyVIDEO3000 saa7134 initial gpio_mode = 00000000 saa7134: initial gpio_state = 00031000 Here PHILIPS_PAL(tuner=5) works fine. So it seems these TCL2002MB tuners come in different flavours. Gerd, can you apply the GPIO printk patch ? I modified Tat Chee's patch to unconditionally print the info, we can make this silent (i.e. dprintk) later, when we have enough data ! Robert, you reported you have a FV3000 and use tuner=37. Can you apply this patch, as I would be very interested in your GPIO (and wether you have FM and remote control chip). Marco, your data would be valuable, too. Regards, Gunther
Attachment:
gmpatch-saa7134-015_gpio
Description: Binary data
