Bill Eldridge wrote:
>
> Bill Eldridge wrote:
> >
> > I got an AVerTV Studio w/ FM delivered,
> > and am wondering how to get audio off of it -
> > btaudio or not. If I don't have xawtv or ffmpeg
> > running, there's audio coming out the Aver
> > audio jack. As soon as I run xawtv or ffmpeg,
> > the audio disappears, unless I switch to
> > S-Video or Composite, at which point the
> > TV audio comes back. (but of course there's
> > no TV picture). Same if I use
> > xawtv -C /dev/{dsp0,dsp1,dsp2} I get nothing off
> > of the btaudio analog or digital.
> >
> > The card is auto detected as type 41,
> > with tuner 28 (confirmed with tuner info
> > on the card). The tda9840 chip is also
> > autodetected.
>
> This is a RH7.2, kernel 2.4.19-pre3,
> bttv-0.8.37, xawtv-3.73 system. I tried
> the 3 Aver card settings listed, card=41
> is autodetected & works best. Used both
> v4l2=1 & 0, no change.
Bill, can you
- Identify your board revision (e.g. M168T or else)
See http://mayerg.gmxhome.de/bttv/bttv-gallery.html
(and send me a picture if it is not yet there)
- Post "dmesg|grep bttv"?
