Hope someone can help with this. Running RedHat 7.1, kernel 2.4.16, Matrox Mill. G200 AGP, Osprey-100 capture card, xawtv-3.34, bttv-0.7.83, AMD K62/500, Asus P5A motherboard. This is for a webcam not tv viewing. Under win98 this hardware works great in overlay mode. Under Linux Ihave been unable to use overlay. Overlay mode is filled with verticle stripes on a dark background and I cannot see any image. This extends out the right side of the xawtv window. Attached is a clip of dmesg and xterm when I start xawtv.
TIA, Jim Seymour
Linux video capture interface: v1.00 i2c-core.o: i2c core module i2c-algo-bit.o: i2c bit algorithm module bttv: driver version 0.7.83 loaded bttv: using 2 buffers with 2080k (4160k total) for capture bttv: Host bridge is Acer Laboratories Inc. [ALi] M1541 bttv: Bt8xx card found (0). PCI: Found IRQ 11 for device 00:0c.0 PCI: Sharing IRQ 11 with 00:0c.1 bttv0: Bt878 (rev 17) at 00:0c.0, irq: 11, latency: 32, memory: 0xe6000000 bttv0: detected: Osprey-100 [card=10], PCI subsystem ID is 0070:ffffff00 bttv0: using: BT878(Hauppauge (bt878)) [card=10,insmod option] bttv0: Hauppauge/Voodoo msp34xx: reset line init [5] i2c-core.o: adapter bt848 #0 registered as adapter 0. bttv0: Hauppauge eeprom: model=64405, tuner=Unspecified (4), radio=no bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found tvaudio: TV audio decoder + audio/video mux driver tvaudio: known chips: tda9840,tda9873h,tda9874a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951) i2c-core.o: driver generic i2c audio driver registered. i2c-core.o: driver i2c TV tuner driver registered. bttv0: PLL: 28636363 => 35468950 ... ok bttv0: PLL: switching off
[Jim@localhost Jim]$ xawtv -b 24 This is xawtv-3.34, running on Linux/i586 (2.4.16-120101) visual: id=0x23 class=4 (TrueColor), depth=24 visual: id=0x24 class=4 (TrueColor), depth=24 visual: id=0x25 class=5 (DirectColor), depth=24 visual: id=0x26 class=5 (DirectColor), depth=24 image format list for port 46 0x32595559 (YUY2) packed 0x32315659 (YV12) planar 0x30323449 (I420) planar Xv: using port 46 for hw scaling x11: 1024x768, 24 bit/pixel, 3072 byte/scanline, DGA v4l: 1024x768, 24 bit/pixel, 3072 byte/scanline wmhooks: netwm