Hi;
Need a little push.
I can get xawtv to come up but I never get any channels.
Using all combinations of options for Video Source/Freq
I think I need to apply the 0.8.31 driver but can't seem to get the
patch to work. I cahnged the pathnames in the patch file to
match my dist.
--- linux-2.4.5/include/linux/videodev.h Mon Nov 19 11:04:28 2001
+++ linux/include/linux/videodev.h Mon Nov 19 11:41:10 2001
> cd /usr/src
> sudo patch < bttv-0.8.31/10_videodev-2.4.15-pre6.diff
can't find file to patch at input line 3
Perhaps you should have used the -p or --strip option?
The text leading up to this was:
--------------------------
|--- linux-2.4.5/include/linux/videodev.h Mon Nov 19 11:04:28 2001
|+++ linux/include/linux/videodev.h Mon Nov 19 11:41:10 2001
--------------------------
File to patch: ctl+d
> ls linux-2.4.5/include/linux/videodev.h
linux-2.4.5/include/linux/videodev.h
============================================================================
Slackware 8.0 kernel build: 2.4.5 #6 Fri Jun 22 01:38:20 PDT 2001
gcc version 2.95.3 20010315
Cox Cable Virginia, USA
> lspci
00:00.0 Host bridge: Intel Corporation 440FX - 82441FX PMC [Natoma] (rev 02)
00:07.0 ISA bridge: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II]
(rev 01)
00:07.1 IDE interface: Intel Corporation 82371SB PIIX3 IDE [Natoma/Triton II]
00:0b.0 SCSI storage controller: BusLogic BT-946C (BA80C30) [MultiMaster 10]
00:11.0 VGA compatible controller: Matrox Graphics, Inc. MGA 2064W
[Millennium] (rev 01)
00:13.0 Multimedia video controller: Brooktree Corporation Bt878 (rev 11)
00:13.1 Multimedia controller: Brooktree Corporation Bt878 (rev 11)
> dmesg
i2c-algo-bit.o: i2c bit algorithm module
bttv: driver version 0.7.57 loaded
bttv: using 2 buffers with 2080k (4160k total) for capture
bttv: Host bridge needs ETBF enabled.
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 00:13.0, irq: 9, latency: 66, memory: 0xfff7e000
bttv0: subsystem: 0070:13eb => Hauppauge WinTV => card=10
bttv0: model: BT878(Hauppauge new (bt878)) [autodetected]
bttv0: enabling 430FX/VP3 compatibilty
bttv0: Hauppauge msp34xx: reset line init
i2c-core.o: adapter bt848 #0 registered as adapter 0.
bttv0: Hauppauge eeprom: model=44801, tuner=Temic 4036FY5 (8), radio=no
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
tvaudio: TV audio decoder + audio/video mux driver
tvaudio: known chips:
tda9840,tda9873h,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951)
i2c-core.o: driver generic i2c audio driver registered.
i2c-core.o: driver i2c TV tuner driver registered.
tuner: chip found @ 0x61
bttv0: i2c attach [Temic NTSC (4036 FY5)]
i2c-core.o: client [Temic NTSC (4036 FY5)] registered to adapter [bt848
#0](pos. 0).
bttv0: PLL: 28636363 => 35468950 ... ok
tuner: TV freq out of range
tuner: TV freq out of range
bttv0: PLL: switching off
bttv0: PLL: 28636363 => 35468950 ... ok
bttv0: PLL: switching off
bttv0: PLL: 28636363 => 35468950 ... ok
bttv0: PLL: switching off
bttv0: PLL: 28636363 => 35468950 ... ok
tuner: TV freq out of range
tuner: TV freq out of range
bttv0: PLL: switching off
bttv0: PLL: 28636363 => 35468950 ... ok
bttv0: PLL: switching off
bttv0: PLL: 28636363 => 35468950 ... ok
bttv0: PLL: switching off
