Going through the driver information, I see that btaudio allows either digital or analog access to the audio. When I install the module with the analog=1 option, I get a mixer that finds 3 lines on my Hauppauge BT878, as mentioned in the documentation, and everything appears as /dev/dsp1 & /dev/mixer1, etc. (Unfortunately, the docs also mention that line #2 might be very noisy, which is also true, and I end up having to feed it out to an additional soundcard). My big question is if I run btaudio as digital, what device(s) can I access to get a mixer or sound in recording. (I'd like to just have the TV card in my machine without additional sound card). Or is there another way to access the audio portion of the incoming TV signal (analog or digital). Thanks, Bill -- Bill Eldridge Radio Free Asia bill@xxxxxxx