Hi all! I'm with a stranger problem with my Bt878 card and the 2.4.5 kernel series and above (I didn't try with lower versions). I _can_ listen to the sound when using the fbtv program, but under XFree86 (v4.1.0) I can't have the same success, either using the zapping or xawtv applications (xawtv even does not show any image). Can someone have any ideas about what can I do to solve this problem? thanks a lot for your attention, Lucas Some useful information: /sbin/modprobe videodev /sbin/modprobe tuner type=2 debug=1 /sbin/modprobe msp3400 debug=2 /sbin/modprobe bttv card=10 tuner=2 radio=1 autoload=0 Linux video capture interface: v1.00 i2c-core.o: i2c core module i2c-core.o: driver i2c TV tuner driver registered. i2c-core.o: driver i2c msp3400 driver registered. i2c-algo-bit.o: i2c bit algorithm module bttv: driver version 0.7.72 loaded bttv: using 2 buffers with 2080k (4160k total) for capture bttv: BT848 and your chipset may not work together. <----- bttv: going to disable overlay. bttv: Bt8xx card found (0). bttv0: Bt878 (rev 2) at 00:0f.0, irq: 9, latency: 32, memory: 0xfd9fe000 bttv0: subsystem: 0070:13eb => Hauppauge WinTV => card=10 bttv0: model: BT878(Hauppauge new (bt878)) [insmod option] bttv0: Hauppauge msp34xx: reset line init tuner: chip found @ 0xc2 bttv0: i2c attach [Philips NTSC] i2c-core.o: client [Philips NTSC] registered to adapter [bt848 #0](pos. 0). msp34xx: init: chip=MSP3430G-A1, has NICAM support msp3410: daemon started msp3410: thread: sleep bttv0: i2c attach [MSP3430G-A1] i2c-core.o: client [MSP3430G-A1] registered to adapter [bt848 #0](pos. 1). i2c-core.o: adapter bt848 #0 registered as adapter 0. bttv0: Hauppauge eeprom: model=61381, tuner=Philips FM1236 (2), radio=yes bttv0: i2c: checking for MSP34xx @ 0x80... found bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found msp34xx: AUDC_SET_INPUT(4) msp3410: thread: wakeup msp3410: setting mode: autodetect start (0x0001) msp3410: current mode: ERROR (0x0000) <------ msp34xx: setbass: 32768 0x00 msp34xx: settreble: 32768 0x00 msp34xx: setvolume: mute=off 65535:65535 v=0x73 b=0x00 msp3410: thread: sleep 00:0f.0 Multimedia video controller: Brooktree Corporation Bt878 (rev 02) Subsystem: Hauppauge computer works Inc.: Unknown device 13eb Flags: bus master, medium devsel, latency 32, IRQ 9 Memory at fd9fe000 (32-bit, prefetchable) [size=4K] 00:0f.1 Multimedia controller: Brooktree Corporation Bt878 (rev 02) Subsystem: Hauppauge computer works Inc.: Unknown device 13eb Flags: bus master, medium devsel, latency 32, IRQ 9 Memory at fd9ff000 (32-bit, prefetchable) [size=4K]