More Xawtv, or bttv problems

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



List PCI slots for the Hauppauge card:
00:0e.0 Multimedia video controller: Brooktree Corporation Bt878 (rev 02)
00:0e.1 Multimedia controller: Brooktree Corporation Bt878 (rev 02)

I ran a make and make install for bttv-0.7.83 and ./configure, make, and make 
install for xawtv 3.64 packages.

New Error when trying to run xawtv:

This is xawtv-3.64, running on Linux/i686 (2.4.2-2)
can't open /dev/video0: No such device
v4l-conf had some trouble, trying to continue anyway
v4l2: open /dev/video0: No such device
v4l: open /dev/video0: No such device
no video grabber device available
*Note I have the file: dev/video0
Is it corrupt?  How can I fix it if it is?  Is there anyway to remove it and 
reinstall it?
 
Error when I try modprobe bttv:

/lib/modules/2.4.2-2/kernel/drivers/media/video/bttv.o: unresolved symbol 
__io_virt_debug
/lib/modules/2.4.2-2/kernel/drivers/media/video/bttv.o: unresolved symbol 
i2c_master_send
/lib/modules/2.4.2-2/kernel/drivers/media/video/bttv.o: unresolved symbol 
__wake_up
/lib/modules/2.4.2-2/kernel/drivers/media/video/bttv.o: unresolved symbol 
i2c_bit_del_bus
/lib/modules/2.4.2-2/kernel/drivers/media/video/bttv.o: unresolved symbol 
video_register_device
/lib/modules/2.4.2-2/kernel/drivers/media/video/bttv.o: unresolved symbol 
remove_wait_queue
/lib/modules/2.4.2-2/kernel/drivers/media/video/bttv.o: unresolved symbol 
video_unregister_device
/lib/modules/2.4.2-2/kernel/drivers/media/video/bttv.o: unresolved symbol 
i2c_bit_add_bus
/lib/modules/2.4.2-2/kernel/drivers/media/video/bttv.o: unresolved symbol 
request_module
/lib/modules/2.4.2-2/kernel/drivers/media/video/bttv.o: unresolved symbol 
__pollwait
/lib/modules/2.4.2-2/kernel/drivers/media/video/bttv.o: unresolved symbol 
add_wait_queue
/lib/modules/2.4.2-2/kernel/drivers/media/video/bttv.o: unresolved symbol 
i2c_master_recv
/lib/modules/2.4.2-2/kernel/drivers/media/video/bttv.o: unresolved symbol 
mem_map
/lib/modules/2.4.2-2/kernel/drivers/media/video/bttv.o: unresolved symbol 
init_mm
/lib/modules/2.4.2-2/kernel/drivers/media/video/bttv.o: insmod 
/lib/modules/2.4.2-2/kernel/drivers/media/video/bttv.o failed
/lib/modules/2.4.2-2/kernel/drivers/media/video/bttv.o: insmod bttv failed

List of modules installed:
Module                  Size  Used by
ymfpci                 42368   0  (autoclean)
uart401                 6768   0  (autoclean) [ymfpci]
sound                  62688   0  (autoclean) [uart401]
ac97_codec              8800   0  (autoclean) [ymfpci]
soundcore               4464   4  (autoclean) [ymfpci sound]
ide-cd                 26848   0  (autoclean)
cdrom                  27232   0  (autoclean) [ide-cd]
cpia_usb                4768   0  (autoclean) (unused)
cpia_pp                 3712   0  (autoclean) (unused)
cpia                   45104   0  (autoclean) [cpia_usb cpia_pp]
videodev                5024   0  (autoclean) [cpia]
parport                25952   0  (autoclean) [cpia_pp]
autofs                 11264   1  (autoclean)
tulip                  38544   1  (autoclean)
ipchains               38976   0  (unused)
usb-uhci               20720   0  (unused)
usbcore                49664   1  [cpia_usb usb-uhci]

Anyone know where I am going wrong, and how can I fix it?  I have spend many, 
many hours reading all the README, and can't solve this issue.

Thanks,


Jeff





[Index of Archives]     [Linux DVB]     [Video Disk Recorder]     [Asterisk]     [Photo]     [DCCP]     [Netdev]     [Xorg]     [Util Linux NG]     [Xfree86]     [Free Photo Albums]     [Fedora Users]     [Fedora Women]     [ALSA Users]     [ALSA Devel]     [Linux USB]

Powered by Linux