Hi, I've joined the list to get my 3Dfx VoodooTV FM (Euro) card working correctly. Eventual aim is to start work on recording programs with subtitles. Here is a summary of what I have found and tried so far. * can successfully install the modules of bttv and tuner which auto-detects the card correctly. * Composite1-3 screens are all blue * Cannot tune in any channels in europe-west (UK), the screen is noisy but does change when changing frequencies. Also only the top third of screen tends to be noisy the rest is occasionally updated. * Picture cannot be tuned in both xamtv and fbtv. Scantv also doesn't detect any stations > > pll config wrong? > Gerd ! With "pll=28" the picture is perfect ! * From a previous post setting pll=28 does not affect the picture. * When the starting xawtv or fbtv (PAL, Television, europe-west) I typically get the following in syslog. bttv0: PLL: 28636363 => 35468950 ... ok This line is what happens regardless of whether the pll=28 is specified or not. The on changing channels particularly to channel 24 the following log messages occur. spurcheck triggered with: 35700 1120000 32900000 39900000 503250000 spurcheck triggered with: 35700 1120000 32900000 39900000 503250000 spurcheck triggered with: 35700 1120000 32900000 39900000 503250000 spurcheck triggered with: 35700 1120000 32900000 39900000 503250000 The foloowing is my current setup and the kernel boot messages. Hardware:- 3Dfx Voodoo TV FM (Euro) (bt878, MT2032 Tuner) Pentium 166MHz VX chipset / Dual 233MHz BX chipset 128Mb RAM Millenium II 4Mb PCI Software:- Debian v2.2r2 Kernel v2.2.19 bttv v0.7.77 i2c v2.6.0 xawtv v3.61 Relevant Boot messages ====================== i2c-core.o: i2c core module i2c-proc.o version 2.6.0 (20010228) i2c-dev.o: i2c /dev entries driver module i2c-core.o: driver i2c-dev dummy driver registered. i2c-core.o: driver i2c TV tuner driver registered. Linux video capture interface: v1.00 i2c-algo-bit.o: i2c bit algorithm module bttv: driver version 0.7.77 loaded bttv: using 2 buffers with 2080k (4160k total) for capture bttv: Bt8xx card found (0). bttv0: Bt878 (rev 17) at 00:11.0, irq: 11, latency: 32, memory: 0xe1906000 bttv0: detected: 3Dfx VoodooTV FM/ VoodooTV 200 [card=68], PCI subsystem ID is 121a:3000 bttv0: using: BT878(3Dfx VoodooTV FM (Euro)) [card=68,autodetected] bttv0: Hauppauge/Voodoo msp34xx: reset line init [20] i2c-dev.o: Registered 'bt848 #0' as minor 0 tuner: chip found @ 0xc0 bttv0: i2c attach [MT2032 universal] i2c-core.o: client [MT2032 universal] registered to adapter [bt848 #0](pos.0). i2c-core.o: adapter bt848 #0 registered as adapter 0. bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found I would be grateful if anyone has any pointers that may get this card working enough to get a decent picture showing. Cheers David.