Go to: v3tv.sf.net On Sat, Sep 08, 2001 at 01:57:37PM -0500, Anthony DeSalvatore wrote: > I'm running Debian Linux with kernel 2.4.9, and I have a Voodoo 3 3500 TV > card. I can't seem to get bttv to work. I can 'insmod videodev' fine, but > then when I do a 'modprobe bttv card=3', I get the following error: > > --snip-- > /lib/modules/2.4.9/kernel/drivers/media/video/bttv.o: init_module: No > such device > Hint: insmod errors can be caused by incorrect module parameters, > including invalid IO or IRQ parameters > /lib/modules/2.4.9/kernel/drivers/media/video/bttv.o: insmod > /lib/modules/2.4.9/kernel/drivers/media/video/bttv.o failed > /lib/modules/2.4.9/kernel/drivers/media/video/bttv.o: insmod bttv failed > --snip-- > > and the following gets posted in /var/log/messages: > > --snip-- > Sep 8 13:53:46 host115 kernel: i2c-core.o: i2c core module > Sep 8 13:53:46 host115 kernel: i2c-algo-bit.o: i2c bit algorithm module > Sep 8 13:53:46 host115 kernel: bttv: driver version 0.7.72 loaded > Sep 8 13:53:46 host115 kernel: bttv: using 2 buffers with 2080k (4160k > total) for capture > Sep 8 13:53:46 host115 kernel: bttv: Host bridge needs ETBF enabled. > --snip-- > > I've just about gone crazy trying to figure out how to make this work, > and it's a major bummer to have to boot into windows to watch tv... :) > Any help y'all could give would be greatly appreciated. > > -- > Anthony "Vito" DeSalvatore AIM: HawkeyeV81 > Email: vito@xxxxxxx ICQ: 53580913 > > "Do you know anything about nuclear fusion?" > -- Lee Van Cleef, Escape From New York