Hi ! I'm a newbie to Video 4 Linux. I have tried to install drivers and all for my DC10 + and it all seems to be good except for this problem root@pank:~# xawtv This is xawtv-3.57, running on Linux/i686 (2.4.7) Warning: Cannot allocate colormap entry for "lightgray" switching visual (0x2e) WARNING: remote display `0:0' not allowed, using `:0' instead /dev/video0 [v4l]: ioctl VIDIOCSFBUF: Invalid argument v4l-conf had some trouble, trying to continue anyway ioctl: VIDIOCSCHAN(0,Composite,flags=0x0,type=2,norm=2): Invalid argument ioctl: VIDIOCSCHAN(0,Composite,flags=0x0,type=2,norm=3): Invalid argument WARNING: v4l and x11 disagree about the screen size WARNING: Is v4l-conf installed correctly? WARNING: v4l and x11 disagree about the color depth WARNING: fbuf.depth=0, x11 depth=8 WARNING: Is v4l-conf installed correctly? WARNING: v4l and dga disagree about the framebuffer base WARNING: fbuf.base=(nil), dga=0xd0000000 WARNING: Is v4l-conf installed correctly? WARNING: overlay mode disabled And then the X-server switches to black and white and nothing more happens I'm Running 2.4.7 Kernel on an i686 The Card seems to be detected alright though : Zoran ZR36060 + ZR36057/67 MJPEG board driver version 0.7 PCI: Found IRQ 5 for device 00:08.0 MJPEG[0]: Zoran ZR36067 (rev 2) irq: 5, memory: 0xdb105000 MJPEG[0]: subsystem vendor=0x1031 id=0x7efe MJPEG[0]: Initializing i2c bus... adv7176_attach: adv7176 rev. 1 at 0x56 DC10plus[0] card detected DC10plus[0]: Zoran ZR36060 (rev 1) MJPEG: 1 card(s) found MJPEG: using 2 V4L buffers of size 128 KB DC10plus[0]: Initializing card[0], zr=f98afa00 DC10plus[0]: Testing interrupts... DC10plus[0]: interrupts received: GIRQ1:50 queue_state=0/0/0/0 DC10plus[0]: procfs entry /proc/zoran0 allocated. data=f98afa00 Can anyone help ? Ole Andreas Torvmark