In the /etc/modules.conf file, bttv is loaded with card=10 and
the tuner type=2
I changed the cards around and enabled bttv_gpio. Still no audio,
here is a
log from /var/log/messages.
-------------------- /var/log/messages -------------------
i2c-core.o: i2c core module
i2c-core.o: driver i2c msp3400 driver registered.
i2c-core.o: driver i2c TV tuner driver registered.
Creative EMU10K1 PCI Audio Driver, version 0.7, 10:56:41 Feb
8 2001
emu10k1: EMU10K1 rev 8 model 0x8027 found, IO at 0xd400-0xd41f, IRQ
3
btaudio: driver version 0.4 loaded [digital audio mode]
btaudio: Bt878 (rev 17) at 01:0c.1, irq: 9, latency: 64, memory: 0xf6800000
Linux video capture interface: v1.00
i2c-algo-bit.o: i2c bit algorithm module
bttv: driver version 0.7.57 loaded
bttv: using 2 buffers with 2080k (4160k total) for capture
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 01:0c.0, irq: 9, latency: 64, memory: 0xf7000000
bttv0: subsystem: 0070:13eb => Hauppauge WinTV =>
card=10
bttv0: model: BT878(Hauppauge new (bt878)) [insmod option]
bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init #1]
bttv0: gpio: en=00000007, out=00000002 in=00fffff8 [audio: extern]
bttv0: gpio: en=00000000, out=00000000 in=00fffffb [init #2]
bttv0: gpio: en=00000020, out=00000020 in=00ffffdf [msp34xx]
bttv0: Hauppauge msp34xx: reset line init
i2c-algo-bit.o: Adapter: bt848 #0 scl: 1 sda: 1 -- testing...
i2c-algo-bit.o:1 scl: 1 sda: 0
i2c-algo-bit.o:2 scl: 1 sda: 1
i2c-algo-bit.o:3 scl: 0 sda: 1
i2c-algo-bit.o:4 scl: 1 sda: 1
i2c-algo-bit.o: bt848 #0 passed test.
tuner: chip found @ 0x61
bttv0: i2c attach [Philips NTSC]
i2c-core.o: client [Philips NTSC] registered to adapter [bt848 #0](pos.
0).
i2c-core.o: adapter bt848 #0 registered as adapter 0.
bttv0: Hauppauge eeprom: model=45231, tuner=Philips FM1236 (2), radio=yes
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
tvaudio: TV audio decoder + audio/video mux driver
tvaudio: known chips: tda9840,tda9873h,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54
(PV951)
i2c-core.o: driver generic i2c audio driver registered.
bttv0: gpio: en=00000027, out=00000024 in=00ffffd8 [audio: off]
----------------------------- end ---------------------------------
John Cornelius wrote:
Hi I have a Hauppauge Theater PCI WinTV card installed. It has two msp34xx sound chips on it. I also use the emu10k1 module which comes with a standard kernel. I don't know if I am going to be much help. What I have found is that if I change out a card e.g I added a SCSI card that the sound stopped working on the TV card. It has happened on a few occasions now. I have to shuffle the cards around between slots before it works. Sometimes I have had to try a couple of different positions. Something to do with shared PCI memory (I think). Have you checked to make sure your line in to your sound card is enabled in your mixer? Have you loaded the correct card number in your /etc/modules.conf file ? card=10. John Cornelius > Hello, > > I have the Hauppauge WinTV-PVR-pci card installed. I'm getting all the > TV channels from cable. However, I get no audio! I have the latest > bttv code > and am using the emu10k1 audio module for the Creative SB card. > Audio is > fine for everything but the WinTV. The audio chip on the Hauppauge > card is > MSP3435G. I've loaded msp34xx, btaudio, tvaudio and fooled around with > various options to bttv. All to no avail, still no audio. > > I use xawtv to watch TV. Any suggestions, tips? There is no audio > from the > WinTV audio out jack. This jack is also connected to the line in jack > of the > audio card. With GMIX, I turn everything on, but still no audio from > WinTV. > What am I missing or doing wrong? > > Thanks.
-- Neville Chandler ----------------------------------------------------------- nchandler@xxxxxxxxxx (732) 949 2788 2K-528 -----------------------------------------------------------
