Sorry for not answering to your mail earlier, but for some reason I
didn't get the mail to my account, but I saw it in the list-archives.
> Please send output of
> bttv-0.7.xxx/tools/detect and .../eeprom
./detect
0x80: msp34xx/tea6300 sound processor (error: Device or resource busy)
0x96: ??? (error: Device or resource busy)
0xa0: eeprom
0xc0: tuner (error: Device or resource busy)
./eeprom
0000 f0 00 00 00 3e ff ff ff ff ff ff ff ff ff ff ff ................
0010 f0 02 0a 07 4b ff ff ff ff ff ff ff ff ff ff ff ....K...........
0020 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
0030 45 6d 70 54 79 56 ff ff ff ff ff ff ff ff ff ff EmpTyV..........
0040 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
0050 30 30 30 33 ff ff ff ff ff ff ff ff ff ff ff ff 0003............
0060 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
0070 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
0080 30 30 30 30 ff ff ff ff ff ff ff ff ff ff ff ff 0000............
0090 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
00a0 32 30 33 35 36 30 36 36 35 38 33 31 39 32 31 36 2035606658319216
00b0 31 36 ff ff ff ff ff ff ff ff ff ff ff ff ff ff 16..............
00c0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
00d0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
00e0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
00f0 ff ff ff ff ff ff ff ff ff ff ff ff 00 12 11 bd ................
> I assume the tda988x or similar on your card is at i2c-address 0x96,
> but this address is hogged falsely by PV951:
> - mv away "tvaudio.o" from /lib/modules/`uname -r`/...
> - change 0x86 to 0x96 for this line in "tda9887.c"
> static unsigned short normal_i2c_range[] = {0x86>>1,0x86>>1,I2C_CLIENT_END};
> Does it work?
Now i can see a couple of channels (but with very bad picture quality
and finetuning does not help).
But it seems that those channels are not on the correct frequencies. I would
guess that the tuner tunes to the wrong frequency somehow.
I'll try to get hold of the frequencies where the channels should be and
compare those to the frequencies where I find them.
I also tried to move back tvaudio.o and it still works the same way.
Thanks for your time
/Daniel
