I am having it on autodetect which works perfectly for me, but maybe not cause i don't have the pro but the rave. Mabe you should give it a try also. cut out of dmesg, maybe it is of some help to you bttv: driver version 0.7.96 loaded bttv: using 4 buffers with 2080k (8320k total) for capture bttv: Host bridge is VIA Technologies, Inc. VT8363/8365 [KT133/KM133] bttv: Bt8xx card found (0). PCI: Enabling device 00:0a.0 (0004 -> 0006) PCI: Assigned IRQ 9 for device 00:0a.0 PCI: Sharing IRQ 9 with 00:0a.1 bttv0: Bt878 (rev 17) at 00:0a.0, irq: 9, latency: 32, mmio: 0xd7000000 bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012 bttv0: using: BT878(Pinnacle PCTV Studio/Ra) [card=39,autodetected] i2c-core.o: adapter bt848 #0 registered as adapter 0. bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: miro: id=31 tuner On Thu, 2003-09-11 at 02:22, Gary Gies wrote: > Can anybody send me the correct settings for /etc/modules.conf for > this card. > > I am close to having it working ok for the video. > > options bttv card=52 radio=1 pll=1 tuner=33 > #options tuner debug=1 > options msp3400 simple=1 > pre-install bttv /sbin/modprobe -k msp3400; /sbin/modprobe -k tuner ; > /sbin/mod > > This seems to work ok for the first 31 channels on my cable signal but > anything above 31 is all static. > > I have plugged a tv into the same cable for testing and all channels > work fine upto about 95 or so. > > Also, when I make changes to this file, do I need to reboot, or can I > just reset the module. > > That would be my next question, how do I reset the module? Perhaps run > /etc/init.d/bttv restart ? > > Thanks -- ================================================= homepage : http://beerke.xs4all.nl email me : albert@xxxxxxxxxx ================================================= The more time you spend in reporting on what you are doing, the less time you have to do anything. Stability is achieved when you spend all your time reporting on the nothing you are doing. ================================================= Gentoo Linux : Gentoo Base System version 1.4.3.8p1 Kernel 2.4.22 i686 AMD Duron(tm) Processor AuthenticAMD =================================================
Attachment:
signature.asc
Description: This is a digitally signed message part
