On Mon, Jan 27, 2003 at 11:11:03PM +1100, Michael Pearce wrote: > Hi, I just bought a PCTV Pro today after reading various reviews, seeing it > was quite high quality. I also check around the net for linux support, and it > seemed to be supported by bttv > > TV works fine, great picture and sound (using 0.7.102), but radio doesn't work > at all. > After perusing this list's archives, I'e seen it suggested that passing > simple=0 or simple=1 to msp3400 might work. It doesn't :P Sure. Have you tried that? > > Upon starting 'radio -f 105.7' I get about a quarter of a second of static, > and then nothing. The dmesg output from this is > > mt2032_set_if_freq rfin=400000000 if1=1090000000 if2=38900000 from=32900000 > to=39900000 > mt2032: rfin=400000000 lo1=284 lo1n=35 lo1a=4 sel=3, lo1freq=1491000000 > mt2032: rfin=400000000 lo2=200 lo2n=25 lo2a=0 num=1512 lo2freq=1052100000 > spurcheck f1=1491000 f2=1052100 from=32900 to=39900 > spurtest n1=1 n2=-2 ftest=-613200 > spurtest n1=1 n2=-3 ftest=-1665300 > spurtest n1=1 n2=-4 ftest=-2717400 > spurtest n1=1 n2=-5 ftest=-3769500 > spurtest n1=2 n2=-3 ftest=-174300 > spurtest n1=2 n2=-4 ftest=-1226400 > spurtest n1=2 n2=-5 ftest=-2278500 > spurtest n1=3 n2=-4 ftest=264600 > spurtest n1=3 n2=-5 ftest=-787500 > spurtest n1=4 n2=-5 ftest=703500 > mt2032 Reg.E=0x3e > mt2032 Reg.F=0x00 > msp34xx: VIDIOCSFREQ > msp34xx: setvolume: mute=on 0:0 v=0x00 b=0x00 > msp34xx: AUDC_SET_RADIO > msp34xx: switching to radio mode > msp3400: setmode: 2 > msp34xx: setvolume: mute=on 65535:65535 v=0x00 b=0x00 > msp34xx: AUDC_SET_INPUT(4) > msp3400: thread: wakeup > msp3400: thread: sleep > tuner: radio freq set to 105.68 > mt2032_set_if_freq rfin=105687500 if1=1085000000 if2=10700000 from=10700000 > to=10700000 > mt2032: rfin=105687500 lo1=227 lo1n=28 lo1a=3 sel=4, lo1freq=1191750000 > mt2032: rfin=105687500 lo2=204 lo2n=25 lo2a=4 num=3140 lo2freq=1075361000 > spurcheck f1=1191750 f2=1075362 from=10700 to=10700 > spurtest n1=1 n2=-2 ftest=-958974 > spurtest n1=1 n2=-3 ftest=-2034336 > spurtest n1=1 n2=-4 ftest=-3109698 > spurtest n1=1 n2=-5 ftest=-4185060 > spurtest n1=2 n2=-3 ftest=-842586 > spurtest n1=2 n2=-4 ftest=-1917948 > spurtest n1=2 n2=-5 ftest=-2993310 > spurtest n1=3 n2=-4 ftest=-726198 > spurtest n1=3 n2=-5 ftest=-1801560 > spurtest n1=4 n2=-5 ftest=-609810 > mt2032 Reg.E=0x2e > mt2032 Reg.F=0x10 > msp34xx: VIDIOCSFREQ > msp34xx: setvolume: mute=on 0:0 v=0x00 b=0x00 > msp3400: thread: wakeup > msp3400: thread: sleep > msp34xx: VIDIOCGAUDIO > msp34xx: AUDC_SET_INPUT(1) > msp34xx: scart switch: in2 => 0 > msp3400: FM-Radio setstereo: stereo > msp3400: setstereo final source/matrix = 0x20 > msp34xx: VIDIOCSAUDIO > msp34xx: setvolume: mute=off 65535:65535 v=0x73 b=0x00 > msp34xx: setbass: 32768 0x00 > msp34xx: settreble: 32768 0x00 > msp3400: FM-Radio setstereo: mono > msp3400: setstereo final source/matrix = 0x0 > msp34xx: VIDIOCGAUDIO > msp34xx: AUDC_SET_INPUT(1) > msp34xx: VIDIOCSAUDIO > msp34xx: setvolume: mute=off 65535:65535 v=0x73 b=0x00 > msp34xx: setbass: 32768 0x00 > msp34xx: settreble: 32768 0x00 > msp3400: FM-Radio setstereo: mono > msp3400: setstereo final source/matrix = 0x0 > tuner: radio freq set to 105.68 > mt2032_set_if_freq rfin=105687500 if1=1085000000 if2=10700000 from=10700000 > to=10700000 > mt2032: rfin=105687500 lo1=227 lo1n=28 lo1a=3 sel=4, lo1freq=1191750000 > mt2032: rfin=105687500 lo2=204 lo2n=25 lo2a=4 num=3140 lo2freq=1075361000 > spurcheck f1=1191750 f2=1075362 from=10700 to=10700 > spurtest n1=1 n2=-2 ftest=-958974 > spurtest n1=1 n2=-3 ftest=-2034336 > spurtest n1=1 n2=-4 ftest=-3109698 > spurtest n1=1 n2=-5 ftest=-4185060 > spurtest n1=2 n2=-3 ftest=-842586 > spurtest n1=2 n2=-4 ftest=-1917948 > spurtest n1=2 n2=-5 ftest=-2993310 > spurtest n1=3 n2=-4 ftest=-726198 > spurtest n1=3 n2=-5 ftest=-1801560 > spurtest n1=4 n2=-5 ftest=-609810 > mt2032 Reg.E=0x2e > mt2032 Reg.F=0x10 > msp34xx: VIDIOCSFREQ > msp34xx: setvolume: mute=off 0:0 v=0x00 b=0x00 > msp3400: thread: wakeup > msp3400: thread: sleep > msp34xx: VIDIOCGAUDIO > msp34xx: VIDIOCGAUDIO > msp34xx: VIDIOCGAUDIO > msp34xx: AUDC_SET_INPUT(4) > msp34xx: VIDIOCSAUDIO > msp34xx: setvolume: mute=on 65535:65535 v=0x00 b=0x00 > msp34xx: setbass: 32768 0x00 > msp34xx: settreble: 32768 0x00 > msp3400: FM-Radio setstereo: mono > msp3400: setstereo final source/matrix = 0x0 > > > When I start 'radio -q -f 105.7' I can hear static constantly, and the > following dmesg output is given > > mt2032_set_if_freq rfin=400000000 if1=1090000000 if2=38900000 from=32900000 > to=39900000 > mt2032: rfin=400000000 lo1=284 lo1n=35 lo1a=4 sel=3, lo1freq=1491000000 > mt2032: rfin=400000000 lo2=200 lo2n=25 lo2a=0 num=1512 lo2freq=1052100000 > spurcheck f1=1491000 f2=1052100 from=32900 to=39900 > spurtest n1=1 n2=-2 ftest=-613200 > spurtest n1=1 n2=-3 ftest=-1665300 > spurtest n1=1 n2=-4 ftest=-2717400 > spurtest n1=1 n2=-5 ftest=-3769500 > spurtest n1=2 n2=-3 ftest=-174300 > spurtest n1=2 n2=-4 ftest=-1226400 > spurtest n1=2 n2=-5 ftest=-2278500 > spurtest n1=3 n2=-4 ftest=264600 > spurtest n1=3 n2=-5 ftest=-787500 > spurtest n1=4 n2=-5 ftest=703500 > mt2032 Reg.E=0x3e > mt2032 Reg.F=0x00 > msp34xx: VIDIOCSFREQ > msp34xx: setvolume: mute=on 0:0 v=0x00 b=0x00 > msp34xx: AUDC_SET_RADIO > msp34xx: switching to radio mode > msp3400: setmode: 2 > msp34xx: setvolume: mute=on 65535:65535 v=0x00 b=0x00 > msp34xx: AUDC_SET_INPUT(4) > msp3400: thread: wakeup > msp3400: thread: sleep > tuner: radio freq set to 105.68 > mt2032_set_if_freq rfin=105687500 if1=1085000000 if2=10700000 from=10700000 > to=10700000 > mt2032: rfin=105687500 lo1=227 lo1n=28 lo1a=3 sel=4, lo1freq=1191750000 > mt2032: rfin=105687500 lo2=204 lo2n=25 lo2a=4 num=3140 lo2freq=1075361000 > spurcheck f1=1191750 f2=1075362 from=10700 to=10700 > spurtest n1=1 n2=-2 ftest=-958974 > spurtest n1=1 n2=-3 ftest=-2034336 > spurtest n1=1 n2=-4 ftest=-3109698 > spurtest n1=1 n2=-5 ftest=-4185060 > spurtest n1=2 n2=-3 ftest=-842586 > spurtest n1=2 n2=-4 ftest=-1917948 > spurtest n1=2 n2=-5 ftest=-2993310 > spurtest n1=3 n2=-4 ftest=-726198 > spurtest n1=3 n2=-5 ftest=-1801560 > spurtest n1=4 n2=-5 ftest=-609810 > mt2032 Reg.E=0x2e > mt2032 Reg.F=0x10 > msp34xx: VIDIOCSFREQ > msp34xx: setvolume: mute=on 0:0 v=0x00 b=0x00 > msp3400: thread: wakeup > msp3400: thread: sleep > msp34xx: VIDIOCGAUDIO > msp34xx: AUDC_SET_INPUT(1) > msp34xx: scart switch: in2 => 0 > msp3400: FM-Radio setstereo: stereo > msp3400: setstereo final source/matrix = 0x20 > msp34xx: VIDIOCSAUDIO > msp34xx: setvolume: mute=off 65535:65535 v=0x73 b=0x00 > msp34xx: setbass: 32768 0x00 > msp34xx: settreble: 32768 0x00 > msp3400: FM-Radio setstereo: mono > msp3400: setstereo final source/matrix = 0x0 > > > Here is the relevant part of my /etc/modules.conf > # bttv stuff > alias char-major-81 videodev > alias char-major-81-0 bttv > options bttv card=52 radio=1 bttv_verbose=2 > options msp3400 simple=0 debug=2 > options tuner type=33 debug=2 > > > Has anyone else had this particular problem with a PCTV Pro? > Any help would be greatly appreciated. You guys have done great work so far > with bttv, I can watch TV perfectly on my PC now :) Just not radio... > > > --Michael Pearce > > > > -- > video4linux-list mailing list > Unsubscribe mailto:video4linux-list-request@xxxxxxxxxx?subject=unsubscribe > https://listman.redhat.com/mailman/listinfo/video4linux-list
