Hi there, I am relatively new to Linux and am trying to get a tuner card installed. It is the Leadtek Winfast tv2000xp deluxe card. My video card is an ATI All in Wonder. I am in Canada and have cable. I have tried Mandrake 9 and Redhat 8 distributions and just cannot seem to get it to work. I have read as much as I can on v4l, bttv, xawtv etc and am probably really close but seem to be missing something. Included below are the contents of config files etc. >From dmesg: (edited) Linux version 2.4.19-16mdk (quintela@xxxxxxxxxxxxxxxxxxx) (gcc version 3.2 (Mandrake Linux 9.0 3.2-1mdk)) #1 Fri Sep 20 18:15:05 CEST 2002 256MB LOWMEM available. Initializing CPU#0 Detected 451.027 MHz processor. CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K CPU: Intel Pentium III (Katmai) stepping 03 Linux video capture interface: v1.00 i2c-core.o: i2c core module version 2.6.4 (20020719) i2c-algo-bit.o: i2c bit algorithm module version 2.6.4 (20020719) bttv: driver version 0.7.96 loaded bttv: using 4 buffers with 2080k (8320k total) for capture bttv: Host bridge is Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge bttv: Host bridge needs ETBF enabled. bttv: Bt8xx card found (0). PCI: Found IRQ 9 for device 00:09.0 PCI: Sharing IRQ 9 with 00:09.1 PCI: Sharing IRQ 9 with 00:0f.0 bttv0: Bt878 (rev 17) at 00:09.0, irq: 9, latency: 32, mmio: 0xd6001000 bttv0: detected: Leadtek WinFast TV 2000 [card=34], PCI subsystem ID is 107d:660 6 bttv0: using: BT878(Leadtek WinFast 2000/ W) [card=34,insmod option] bttv0: enabling ETBF (430FX/VP3 compatibilty) bttv0: using tuner=5 bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found tuner: probing bt848 #0 i2c adapter [id=0x10005] tuner: chip found @ 0xc2 bttv0: i2c attach [client=Philips NTSC (FI1236 and compati,ok] bttv0: registered device video0 bttv0: registered device vbi0 bttv0: registered device radio0 tvaudio: TV audio decoder + audio/video mux driver tvaudio: known chips: tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea642 0,tda8425,pic16c54 (PV951) /etc/modules.conf alias eth0 8139too options bttv card=34 radio=1 options tuner type=2 above snd-emu10k1 snd-pcm-oss alias sound-slot-0 snd-emu10k1 probeall usb-interface usb-uhci /etc/modules bttv tvaudio I tried updating bttv drivers, v4l, kernel etc with no luck. Hope someone can help me. Darren
