Go here: http://sourceforge.net/project/showfiles.php?group_id=12629 You need the drm-kernel and ATI modules for your version of X If you are using X 4.2. then these are the 2 files you need: 1) ATI-4.2.0-16.i386.tar.gz This one just needs to be unpacked and then copy the files into the appropriate location. And then configure X to use the radeon driver. 2) You will need to be sure your kernel is compiled with DRM and I2C support and that the Radeon DRM driver is compiled as a module or not at all. >From my kernel config, showing the I2C support (I think this is needed to talk to the tuner) <*> I2C support <*> I2C bit-banging interfaces <*> I2C device interface <*> I2C /proc interface (required for hardware sensors) Compile your kernel and install it 3) drm-kernel-1.2.0-16.tar.gz (This may not be required if you just need the tuner functioning) This contains the code to compile a the drm module for your kernel. Compile the drm module and then copy the resulting module radeon.o into /lib/modules/2.4.xx/kernel/drivers/char/drm/ 'modprobe radeon' should load the module. I think this is really only for accelerated 3D. Now when you start X Look in /var/log/XFree86.0.log for something like the following: (II) RADEON(0): Using R200 i2c bus access method (II) RADEON(0): I2C bus "Radeon multimedia bus" initialized. (II) RADEON(0): *** 0x856557c versus 0x856557c (II) RADEON(0): ref=2700 M=0x2a N=0x2b timing=0x56 (II) Loading sub module "fi1236" (II) LoadModule: "fi1236" (II) Loading /usr/X11R6/lib/modules/multimedia/fi1236_drv.o (II) Module fi1236: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.5 (II) RADEON(0): I2C device "Radeon multimedia bus:FI12xx Tuner" registered. (II) RADEON(0): Detected Philips FI1236 (or compatible) device at 0xc6 Hope I didn't forget anything. On Monday 06 January 2003 06:40 pm, Robert martin wrote: > Re: ati aiw 7500 radeon tuner > Date: > Mon, 6 Jan 2003 11:36:16 -0000 (GMT) > From: > "Mike Holden" <video4linux@xxxxxxxxxxxxxxxxxxxxxx> > Reply-To: > video4linux-list@xxxxxxxxxx > To: > <video4linux-list@xxxxxxxxxx> > References: > 1 > > > since the gatos list seems to be offline and this is a related > > question > > > i have a mandrake 9.0 system and an ati AIW 7500 how does one setup > > the > > > tv tuner???? > > > > bonus points for an rpm but a file "shopping list" and some config > > info > > > would be since > > Don't know this specific card, but mandrake 9 is pretty well set up to > support this stuff out of the box. You probably only need the xawtv > package, which is included, and away you go. > > Mike Holden > --------------------------------------------------------------------------- >-- > > nice try mike but this system was upgraded from intel 815 video and a > hauppage tv card > i only get the Zen channel with xawtv (i think that v4l radeon support > isn't installed) > anybody have a Radeon card?? > > > > -- > video4linux-list mailing list > Unsubscribe mailto:video4linux-list-request@xxxxxxxxxx?subject=unsubscribe > https://listman.redhat.com/mailman/listinfo/video4linux-list
