On Sun, 13 Oct 2002 Stanislav.Gruden@xxxxxxxxxxxxxx wrote: > > New things that work for my card with this code: > - stereo TV sound > - volume and mute control in xawtv work normally I'm glad that works! > - sound does not appear on module loading time but when > it shall - when I start xawtv I believe that the initial modprobe sets audio to LINE1 (hardware default). Hence no sound until you run xawtv and select TV as the input. > - no loud "ksshhhs" when switching channels > > On channel switching, the saa7134 module mutes the audio for a short while (1-2 seconds) until a proper audio signal is decoded. The static sound is due to audio not being muted properly. This was present on my FV2K too until it was solved using external muting. (There's an additional mute: input entry for FV2K for this purpose). However, the saa7134 chip should be able to implement on-chip audio muting and is used for the other saa7134-based boards, so I don't advise defining the mute: input unless nothing else works. T.C. ---- Wan Tat Chee (Lecturer) School of Computer Science, Univ. Science Malaysia, 11800 Minden, Penang, Malaysia. Ofc Ph: +604 657-7888 x 3617 Internet: tcwan@xxxxxxxxx Web: http://nrg.cs.usm.my/~tcwan GPG Key : http://nrg.cs.usm.my/~tcwan/tcw_gpg.asc F'print : FB0F CED7 85A5 ECF9 DEF0 50E8 A550 A0D2 8638 B1EB
