on 9/2/02 12:06 PM, Ackermann Andreas at andreas.ackermann@xxxxxxxxxxx wrote: > Hi, > > I'm sorry to start this subject again, but searching the list archives I > have not found > any final solution for this. > > I bought mine in Germany in april, at Norma, a local food and non-food > distributor. > > It has FM radio and it seems to use the PHILIPS-PAL-tuner, opposed to the > definitions > in saa7134-cards.c where a TECRAM or the like is used. > > Thus, using the card=2 (==FlyVideo3000) insmod option for this card, doesn't > work at all: > video + audio just static. > Using card=3 (==Flyvideo2000) works fine, but there's no audio :-( > > I played around, modifying (erh... messing) the saa7134-cards.c and somehow > got it to do the > right thing: Muting worked. I did this by taking the FlyVideo3000 > definitions and changing the > tuner type and audio input definition. > > However, after switching power off and restarting, audio again didn't work > :-(. Best I could get > was audio as soon as driver was inserted until it was unloaded with muting > not working ... > (If I remember right this was with gpio flags set to all zeros). > > So, is there anybody who has experimented with those gpio flags for this > particular board? > Am I the only one having this _specific_ type of Flyvideo 3000 running under > Linux? > > Is there a way to find out which gpio values are used by the windows driver? > Where can on > get information on this? > > Thanks very much! > > -Andreas (Acki) Hi, send me your modules.conf. I can try to modify (for my tuner - LG) it on my system and check results. Maybe try my solutions (today message below). Wieslaw > _______________________________________________ > Video4linux-list mailing list > Video4linux-list@xxxxxxxxxx > https://listman.redhat.com/mailman/listinfo/video4linux-list >
