Re: Doesn't work at all (:

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



On Fri, Aug 30, 2002 at 05:50:04PM +0200, Gunther Mayer wrote:
> Larry wrote:
> > 
> > I have a tv card Aims Video Highway Xtreme, bt878 I believe.
> > 
> > I installed the drivers found in the 2.4.16 kernel, here's the readout from
> > the loading of these modules:
> > 
> > Linux video capture interface: v1.00
> > i2c-core.o: i2c core module
> > i2c-algo-bit.o: i2c bit algorithm module
> > i2c-dev.o: i2c /dev entries driver module
> > i2c-core.o: driver i2c-dev dummy driver registered.
> > i2c-proc.o version 2.6.1 (20010825)
> > bttv: driver version 0.7.83 loaded
> > bttv: using 2 buffers with 2080k (4160k total) for capture
> > bttv: Host bridge is PCI device 1106:0305
> > bttv: Bt8xx card found (0).
> > bttv0: Bt848 (rev 18) at 00:09.0, irq: 10, latency: 64, memory: 0xdddfe000
> > bttv0: using: BT848A(Aimslab VHX) [card=14,insmod option]
> > i2c-algo-bit.o: Adapter: bt848 #0 scl: 1  sda: 1 -- testing...
> > i2c-algo-bit.o:1 scl: 1  sda: 0
> > i2c-algo-bit.o:2 scl: 1  sda: 1
> > i2c-algo-bit.o:3 scl: 0  sda: 1
> > i2c-algo-bit.o:4 scl: 1  sda: 1
> > i2c-algo-bit.o: bt848 #0 passed test.
> > i2c-dev.o: Registered 'bt848 #0' as minor 0
> > i2c-core.o: adapter bt848 #0 registered as adapter 0.
> > bttv0: i2c: checking for MSP34xx @ 0x80... not found
> > bttv0: i2c: checking for TDA9875 @ 0xb0... not found
> > bttv0: i2c: checking for TDA7432 @ 0x8a... not found
> > tvaudio: TV audio decoder + audio/video mux driver
> > tvaudio: known chips:
> > tda9840,tda9873h,tda9874a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54
> > (PV951)
> > 
> > i2c-core.o: driver generic i2c audio driver registered.
> > i2c-core.o: driver i2c TV tuner driver registered.
> > tuner: chip found @ 0xc0
> > bttv0: i2c attach [client=NoTuner,ok]
> 
> You have selected tuner=4 which means NoTuner.
> 
> Does this work?
> rmmod bttv; insmod bttv card=14 tuner=X # with X=5 or X=2

I tried with both then ran qtvision but qtvision still comes up with a 
gui menu that says 
select device:
Select source:

but there is nothing in the pulldowns to choose from.

Thanks





[Index of Archives]     [Linux DVB]     [Video Disk Recorder]     [Asterisk]     [Photo]     [DCCP]     [Netdev]     [Xorg]     [Util Linux NG]     [Xfree86]     [Free Photo Albums]     [Fedora Users]     [Fedora Women]     [ALSA Users]     [ALSA Devel]     [Linux USB]

Powered by Linux