Christian Grigis wrote: > > Hello, > > On Tue, Aug 27, 2002 at 10:40:49AM +0000, Gerd Knorr wrote: > > According to the specs the difference between tda9886/7 is that the > > later does also support radio, so the chances that it just works after > > loading the tda9887 module are quite high. I'll drop a copy of the > > module into the bttv tarball. > > I saw that you added it in bttv-0.7.97, so I gave it a try tonight. > > There is progress! > I sometimes get a vaguely tuned picture, but it is very noisy. > The picture is always in b/w (regardless of the standard I set, I should > be using PAL anyway, as the card is connected to swiss cable-TV). > 'scantv' sometimes finds a few channels (I am scanning using PAL/europe-west), > but does not find names. > I can't seem to be able to switch channels anyways, the tuner seems to be > showing some error at each attempt. > Teletext (alevt) does not come up with anything either. > > I am attaching the little script I am using to insert manually the various > modules (I experimented with various parameters on bttv, including pll), > as well as a piece of my /var/log/messages. > > The versions I am using are: kernel 2.4.19, bttv-0.7.97, xawtv 3.76. > > Any ideas or any pointers as to what I should try next? This means there is an error on communicating with mt2032 returned from i2c-core: Aug 29 01:25:29 guarddog kernel: i2c-algo-bit.o: bt848 #0 i2c_write: error - bailout. However the lines about hexdump and xogc show mt2032 communicates perfect there. Something happened between, try disabling this routine in the source: miro_pinnacle_gpio Try loading with paramter "bttv_gpio=1" to see if some gpio lines are changed between.
