Hi Randy, Op za 27-07-2002, om 03:10 schreef Randy Broman: > I have an Asus A7V266-E (Via KT266A/VT8233 chipset) system with AMD > Athlon 1800+ CPU, NVidia GeForce3 Ti200 card and SBlive! audio card. I > recently installed a new IOmega Buz card (zr36067, if that matters). > Input source is a DirecTV settop box using S-Video. VIA + Buz usually doesn't work. I'm sorry, but the Buz is picky about mainboard chipsets and the VIA isn't the best option here. Try the card out in a computer with a different mainboard chipset (Intel is usually a good choice, the 440BX, for example). > 1) The xawtv TV image is there, but its "lime green" and extremely > grainy. I can fool around with brightness/hue/contrast/color and make it > a little better, but it basically looks ..... terrible. Output from > xawtv debug level 2 is below. > 2) A test with lavrec doesn't work, either. The output from debug level > 2 is below. You didn't give the dmesg, but your previous mail (I read it but my reply didn't get here) did, IIRC. It had a timeout. That might be caused by the mainboard. Again, please try the card in a different computer. Buz+VIA just doesn't work sometimes... :-(. Ronald -- - .-. - /V\ | Ronald Bultje <rbultje@xxxxxxxxxxxxxxxxxxx> - // \\ | Running: Linux-2.4.18-3 and OpenBSD 3.0 - /( )\ | http://ronald.bitfreak.net/ - ^^-^^
