Tuners are in the "Tuners" file, cards are in
"Cards" and "CARDLIST".
Your card=27 is for a MAXI TV Video PCI2,
not an AVerMedia StudioPro. (card=41 or 6 or 13?)
You were right on the tuner, it is a Philips NTSC, tuner=2
The MAKEDEV file will create your devices for you,
but perhaps not /dev/mixerX
crw------- 1 root root 14, 0 Aug 30 2001 /dev/mixer
crw------- 1 root root 14, 0 Apr 5 2001 /dev/mixer0
crw------- 1 root root 14, 16 Aug 30 2001 /dev/mixer1
crw------- 1 root root 14, 32 Apr 5 2001 /dev/mixer2
crw------- 1 root root 14, 48 Apr 5 2001 /dev/mixer3
Andy Fundinger wrote:
Ok, I tried tuner=27, card=27 tuner=2, and card=27 tuner=27. I also
pulled the sticker off and had a look, I found the following:
Philips
33139 134110C
FM1236/PH hm
SV22 0205
If I had to pick one I'd guess that the tuner is and FM 1236/PH but I
can't find any of these magic numbers in CARDLIST or Cards. In any event
tuner=2 makes the video work fine, tuner=27 seems to leave out a few
stations, whatever that may indicate. Any suggestions? Any how does the
audio look when its working? What is the TVaudio/audio mixer device in
/dev? Could somebody post a commented ls -l showing these devices?
Andy Fundinger
On Sun, 28 Jul 2002, Bill Eldridge wrote:
My guess is you really need tuner=27 for this card.
All the detection is pretty well dependent on getting
the right card & tuner, and while sometimes it can
autodetect, quite often it autodetects a wrong value.
Look under the label on your tuner for actual numbers
and correlate them with the list in Tuners and see what
you really have.
Andy Fundinger wrote:
Ok, I'm kind of confused about how the audio setup is supposed to work. I
seem to have a module called tvaudio and one called tvmixer but I have no
corresponding devices. How are the tv programs supposed to have access to
these drivers? According to Cardlist the AVerTV Studio has a Tda9840
sound chip supported by tvaudio. I can see tvaudio module loading but no
indication of it finding anything. tvmixer says the Phillips NTSC has no
mixer. I can get video through xawtv with modprobe bttv tuner=2 radio=1,
but no sound even bypassing the sound card. I'm using bttv 0.7.94 against
a customized 2.4.18 kernel but I have not patched the kernel with the
bttv code, rather I've been compiling it separately.
Any suggestions? Logs that would help diagnose this problem? Is this a
card problem or did I miss a manual to read? I have until Friday to
return the card if this can't be made to work.
Andy Fundinger
_______________________________________________
Video4linux-list mailing list
Video4linux-list@xxxxxxxxxx
https://listman.redhat.com/mailman/listinfo/video4linux-list
_______________________________________________
Video4linux-list mailing list
Video4linux-list@xxxxxxxxxx
https://listman.redhat.com/mailman/listinfo/video4linux-list
--
Bill Eldridge
Radio Free Asia
bill@xxxxxxx
