Well, here's the deal. With Hauppauge cards, unless you have one that's weird somehow, the audio should come automatically from the line-out on the card. You then have to plug this into the line-in on your sound card. I'd suggest hooking up an audio source to the line-in on the back of the hauppauge card and switching to the composite video input with your tv app, so that you're sure you have an audio source, and then troubleshooting from there. Make sure you haven't plugged the hauppauge card into the modem audio input on your sound card, for instance. - Eric jpantera@xxxxxxxx wrote: > > Nemosoft et al: > MIxer level is not the issue. I tweaked that the other day, and I can > hear a lot of noise (so card is working), but no sound from TV. I have line > out to input jack on the SoundBlaster, and as I said, it works fine on > Wintel. Can anyone please simply point me to this FAQ that everyone keeps > saying "this came up before... look to FAQ". Perhaps I missed some email > when I subscribed to this list, but it's not jumping out at me. I am Unix > Admin / DBA by trade, but mainly HP-UX and Solaris, and Linux is pretty new > to me (although I had a lot of experience with SunOS BSD). Point me to > where I can glean the most info and I probably figure this type of issue out > myself. > > - Joe Pantera > > NOTE: Please copy your response to jpantera@xxxxxxxxxxxxxxx > > -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= > - > Joseph F. Pantera Unix, Database & Network Systems Administrator > Gibson Dunn & Crutcher LLP > Home Email: jpantera@xxxxxxxx > Work Email: jpantera@xxxxxxxxxxxxxx > -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= > - > > ----- Original Message ----- > From: "Nemosoft Unv." <nemosoft@xxxxxxxxxxxxx> > To: <video4linux-list@xxxxxxxxxx> > Sent: Tuesday, June 05, 2001 2:00 PM > Subject: RE: FAQ and Video with no Audio... > > > Hi, > > > > On 05-Jun-01 jpantera@xxxxxxxx wrote: > > > I have a Hauppauge WinTV card, showing up in dmesg as a "B878". On > my > > > RedHat 7 (kernel 2.2.16) image system I installed xawtv, as well as > loaded > > > the bttv and tuner modules (using modprobe). After following these > steps, > > > and tweaking with xawtv configuration for channel, mode, etc... I got my > > > card to work for picture, but no sound (the card works fine, I have a > > > removable hard-drive and swap between Windows and Linux all the time... > In > > > Windows the WinTV card has no problems). I have a creative SoundBlaster > > > PCI512 audio card that works fine with Linux CD Music programs, as well > as > > > "cat <Audio File> > /dev/audio". > > > > [snip] > > > > To me, it sounds (pun unintentional :)) that you should just increase the > > volume level of your line-input (or the input you hooked up to the TV > card) > > with you favorite mixer utility (there are about 67 different tools > > available, so have fun :)), like KMixer. > > > > - Nemosoft > > > > -------------------------------------------------------------------------- > --- > > Try SorceryNet! One of the best IRC-networks around! > irc.sorcery.net:9000 > > URL: never IRC: nemosoft IscaBBS (bbs.isca.uiowa.edu): > Nemosoft > > >> Never mind the daylight << > > > > > > > > > > _______________________________________________ > Video4linux-list mailing list > Video4linux-list@xxxxxxxxxx > https://listman.redhat.com/mailman/listinfo/video4linux-list
