Hi, Is there anybody who has a Pinnacle PCTV Pro v2.4 working on a 2.6 kernel? ^^^^ I am running kernel-2.6.0-test11 + patch-2.6.0-test11-kraxel.gz, with the small 0x86 -> 0x96 change in tda9887.c, and with tvaudio.ko removed. I cannot get mine to output anything sensible. The card is good. /etc/modprobe.conf fragment: alias char-major-81 vtx alias char-major-89 i2c-dev alias char-major-81 bttv alias char-major-81-0 bttv alias char-major-81-1 bttv options i2c-core i2c_debug=1 options i2c-algo-bit bit_test=0 i2c_debug=1 options bttv radio=1 tuner=5 gbuffers=8 autoload=1 bttv_debug=1 vbi_debug=1 bttv_verbose=1 install bttv \ /sbin/modprobe --quiet msp3400 debug=1 ; \ /sbin/modprobe --quiet tda9887 debug=1 pal=b ; \ /sbin/modprobe --quiet tuner debug=1 pal=b ; \ /sbin/modprobe --quiet --ignore-install bttv Tv-card specs: Pinnacle PCTV PRO PAL-BG/I/DK/SECAM Retail D/GB/NL ID on card: EMPTYV-51015403-2.4 Video processor chip: Conexant Fusion 878A 25878-13 Stereo audio processor/decoder chip: Micronas MSP 3410G B11 TV PAL/SECAM/NTSC & FM Demodulator chip: Philips TDA9887TS Multiplexer/demultiplexer chip: Philips HEF4052BT EEprom: ATMEL226 24C02N (see below) Audio Filter: EPCOS K9456M Video Filter: EPCOS K3953M Stereo headphone driver: Philips TDA1308 Clock-crystals: Q1=28.63636 Q2=18.432 eeprom output: 0000 d4 6e 09 00 3e ff ff ff ff ff ff ff ff ff ff ff .n.............. 0010 f0 02 0a 07 4b ff ff ff ff ff ff ff ff ff ff ff ....K........... 0020 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ 0030 45 6d 70 54 79 56 ff ff ff ff ff ff ff ff ff ff EmpTyV.......... 0040 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ 0050 30 30 30 33 ff ff ff ff ff ff ff ff ff ff ff ff 0003............ 0060 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ 0070 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ 0080 30 30 30 30 ff ff ff ff ff ff ff ff ff ff ff ff 0000............ 0090 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ 00a0 32 30 33 35 36 30 36 39 33 30 33 34 35 32 31 30 2035606930345210 00b0 31 32 ff ff ff ff ff ff ff ff ff ff ff ff ff ff 12.............. 00c0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ 00d0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ 00e0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ 00f0 ff ff ff ff ff ff ff ff ff ff ff ff 00 12 11 bd ................ detect output: 0x80: msp34xx/tea6300 sound processor 0x96: ??? (error: Device or resource busy) <-- this is the tda9887 0xa0: eeprom 0xc0: tuner (error: Device or resource busy) tuner output (e.g.): /dev/i2c-0 / 0xc0 / 210.25 MHz ... ok Brigitte D.