Re: LifeView FlyTV Prime 30 FM NTSC saa7130

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



> Es schrieb Shant Hovsepian:
> 
> Hello I recently purchased a LifeView FlyTV Prime 30.  I applied the
> following patches from http://bytesex.org/patches/2.4.23-2/ 20_v4l2,
> 30_video buf, 31_i2c, 31_ir-input, and 31_tuner I was unable to use
> the kraxel patchkit because the compile would error out when it reaced
> an ide module.  I then used the saa7134 0.2.9 modules becasue the
> video4linux1212003 snapshot would error out when compiling a cx??????
> module. After clsoe inspection my card I know that it is NTSC it uses
> the saa7130HL and it is LR138 Rev. H.  I have managed to get all the
> modules loaded and the /dev/video* files are created.  The problem is
> that xawtv only shows snow.
> 
> Here is my dmesg output for the card.
> Linux video capture interface: v1.00
> i2c-core.o: i2c core module
> saa7130/34: v4l2 driver version 0.2.9 loaded
> PCI: Found IRQ 11 for device 00:0b.0
> saa7130[0]: found at 00:0b.0, rev: 1, irq: 11, latency: 64, mmio:
> 0xcfffcc00
> saa7130[0]: subsystem: 5168:0138, board: LifeView FlyVIDEO2000
> [card=3,autodetec
> ted]
> saa7130[0]: board init: gpio is 39500
> saa7130[0]: registered input device for IR
> i2c-core.o: adapter saa7130[0] registered as adapter 0.
> saa7130[0]: i2c eeprom 00: 68 51 38 01 10 28 ff ff ff ff ff ff ff ff
> ff ff
> saa7130[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> ff ff
> saa7130[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> ff ff
> saa7130[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> ff ff
> i2c-core.o: driver i2c TV tuner driver registered.
> tuner: chip found @ 0xc2
> tuner: type set to 37 (LG PAL (newer TAPC series))
> i2c-core.o: client [LG PAL (newer TAPC series)] registered to adapter
> [saa7130[0
> ]](pos. 0).
> saa7130[0]: registered device video0 [v4l2]
> saa7130[0]: registered device vbi0
> saa7130[0]: registered device radio0
> sis900.c: v1.08.06 9/24/2002
> 
> #/etc/modules.conf
> alias char-major-89     i2c-dev
> options i2c-core        i2c_debug=1
> options i2c-algo-bit    bit_test=1
> alias char-major-81     videodev
> alias char-major-81-0   saa7134
> options tuner           debug=1
> 
> Now I realized the tuner type was incorrect and modprobed the saa7134
> with all the Philips NTSC tuner types (2, 17, 42) but xawtv still was
> nothing but snow.
> 

Hi Shant,

also try "tuner=39".

Greetings,
Hermann




[Index of Archives]     [Linux DVB]     [Video Disk Recorder]     [Asterisk]     [Photo]     [DCCP]     [Netdev]     [Xorg]     [Util Linux NG]     [Xfree86]     [Free Photo Albums]     [Fedora Users]     [Fedora Women]     [ALSA Users]     [ALSA Devel]     [Linux USB]

Powered by Linux