Hi, I haven't worked with saa7134 based tv tuner card. Mine is bttv based. To enable audio u have to pass the audiomux value for the relevant driver. Following is how I load the driver modules. modprobe tuner type=5 debug=1 modprobe bttv card=37 audiomux=1 Change accordingly for u'r setup. (audiomux=1 indicates the audio output of the tv tuner card is connected to the line in of the sound card). On Fri, 05 Dec 2003 Paul Mc Auley wrote : >Another datapoint. > >I'm using a Terratec Cinergy 600. If I load saa7134 (using the options >card=11 oss=3), and then run a TV app such as xawtv or tvtime, the sound >doesn't come on. > >However, if I start divx4rec it does manage to unmute the dsp on the TV >card. On exit the sound stays un-muted. > >If I try and change the state using v4ctl I get the following results. > >[21:32-~-paul@felix-4T44]#v4lctl -c /dev/video1 show mute >mute: off >[21:34-~-paul@felix-4T45]#v4lctl -c /dev/video1 setattr mute on >ioctl: VIDIOC_S_CTRL(id=9963785;value=1): Invalid argument >[21:34-~-paul@felix-4T46]#v4lctl -c /dev/video1 setattr mute off >ioctl: VIDIOC_S_CTRL(id=9963785;value=0): Invalid argument > >I'm using the 20031201 snapshot. > Paul > > >-- >video4linux-list mailing list >Unsubscribe mailto:video4linux-list-request@xxxxxxxxxx?subject=unsubscribe >https://www.redhat.com/mailman/listinfo/video4linux-list There is no substitution for hard work. Information is wealth.