Gerd Knorr wrote:
Wieslaw Kierbedz <sprawki@xxxxx> writes:
ir-kbd-gpio has a debug=1 insmod option.
If that shows nothing try bttv irq_debug=1.
Gerd
Events still shows nothing.
Anything in the syslog if you load ir-kbd-gpio with debug=1?
If not, anything in the syslog if you load bttv with irq_debug=1?
Gerd
PS: new snapshot uploaded btw.
It is repeat. I still do not know where is my fault.
Could anybody sign it - what I've did wrong?
I tried ad hoc to run ir-kbd-gpio on other linux box - Aver TV Studio -
autodetected as Aver TV Phone98.
Of course with 2.4 series kernel lirc works as with test3 patched with
lirc patch for 2.5.74.
Result is like before.
list shows event2 as connected device. But there is no reaction for buttons.
Here is a step by step list what I did:
1) new linux-test7-bk9 (I have problems with net-cards modules on
test8/9) recompiled with bytesex patches.
2) v4l, bttv, configured as modules.
3) new bttv snapshot compiled (24102003).
4) loaded bttv, evdev and ir-kbd-gpio modules (this time IR device was
detected with eeprom - there is no "card=" and "remote=" options figured
for bttv - with 2.4 and 2.6 tuner works fine but remote only with
classic lirc support.
5) used list (successfully) and events from input package - cat
/dev/input/event2 and evbug module gives empty output also.
I think I made some fault - what do I miss?
Plese sign any step with right (or no) and add missing between or tell
me what is missing only.
If you need some additinal info (appart theese in older messages) i can
put it on some server (kernel config for example).
Regards
--
Wieslaw Kierbedz
gg 2128870; wieslaw_kierbedz@xxxxxxxxxx
www.v4l.prv.pl (video4linux - podstawy)
--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
