Hi, I'm now using LifeView FlyVideo 3000 with kernel 2.4.22 and xawtv. I installed the saa7134 and patch the v4l2 already. However, I don't why it always said that it can't find station. In my modules.conf is alias sound-slot-0 i810_audio alias char-major-89 i2c-dev options i2c-core i2c_debug=1 options i2c-algo-bit bit_test=1 alias char-major-81 videodev alias char-major-81-0 saa7134 options saa7134 card=2 tuner=1 options tuner debug=1 type=1 There are some problems that... Linux video capture interface: v1.00 i2c-core.o: i2c core module saa7130/34: v4l2 driver version 0.2.8 loaded saa7134[0]: found at 02:01.0, rev: 1, irq: 21, latency: 32, mmio: 0xfa004000 saa7134[0]: subsystem: 5168:0138, board: LifeView FlyVIDEO3000 [card=2,insmod option] i2c-core.o: adapter saa7134[0] registered as adapter 0. saa7134[0]: i2c eeprom 00: 68 51 38 01 10 28 ff ff ff ff ff ff ff ff ff ff saa7134[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7134[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7134[0]: board init: gpio is 39000 i2c-core.o: driver i2c TV tuner driver registered. tuner: chip found @ 0xc2 tuner: type set to 1 (Philips PAL_I (FI1246 and compatibles)) i2c-core.o: client [Philips PAL_I (FI1246 and compa] registered to adapter [saa7134[0]](pos. 0). saa7134[0]: registered device video0 [v4l2] saa7134[0]: registered device vbi0 saa7134[0]: registered device radio0 tuner: tv freq set to 268435455.93 tuner: TV freq (268435455.93) out of range (44-958) saa7134[0]/audio: audio carrier scan failed, using 5.500 MHz [default] 8139too Fast Ethernet driver 0.9.26 What can I do with it?? Is there any thing going wrong?? Thx~~ __________________________________ Do you Yahoo!? Exclusive Video Premiere - Britney Spears http://launch.yahoo.com/promos/britneyspears/
