I had xawtv working but then I tryed to load it again and now their is no video but I have sound. I am in the US and have cable my .xawtv file looks like this [global] freqtab = us-cable [defaults] input = Television norm = NTSC [unknown (2)] channel = 2 and my modules.conf looks like this alias char-major-81 bttv options bttv card=64 tuner=2 my dmesg output looks like this btaudio: Bt878 (rev 17) at 01:0d.1, irq: 9, latency: 64, mmio: 0xf4202000 btaudio: using card config "default" btaudio: registered device dsp0 [digital] btaudio: registered device dsp1 [analog] btaudio: registered device mixer0 Linux video capture interface: v1.00 i2c-core.o: i2c core module version 2.7.0 (20021208) i2c-algo-bit.o: i2c bit algorithm module version 2.7.0 (20021208) bttv: driver version 0.7.106 loaded bttv: using 4 buffers with 2080k (8320k total) for capture bttv: Host bridge is Intel Corp. 82810 GMCH [Graphics Memory Controller Hub] bttv: Bt8xx card found (0). PCI: Enabling device 01:0d.0 (0104 -> 0106) PCI: Found IRQ 9 for device 01:0d.0 bttv0: Bt878 (rev 17) at 01:0d.0, irq: 9, latency: 132, mmio: 0xf4201000 bttv0: detected: ATI TV Wonder/VE [card=64], PCI subsystem ID is 1002:0003 bttv0: using: BT878(ATI TV-Wonder VE) [card=64,insmod option] bttv0: using tuner=2 bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found tuner: probing bt848 #0 i2c adapter [id=0x10005] tuner: chip found @ 0xc0 tuner: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles)) bttv0: PLL: 28636363 => 35468950 .. ok bttv0: registered device video0 bttv0: registered device vbi0 uhci.c: USB Universal Host Controller Interface driver v1.1 PCI: Found IRQ 11 for device 00:1f.2 PCI: Setting latency timer of device 00:1f.2 to 64 uhci.c: USB UHCI at I/O 0x1820, IRQ 11 usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected cdrom: open failed. ip_tables: (C) 2000-2002 Netfilter core team eth1: no IPv6 routers present eth0: no IPv6 routers present bttv0: PLL can sleep, using XTAL (28636363). [drm] AGP 0.99 aperture @ 0xf8000000 64MB [drm] Initialized i810 1.3.0 20030605 on minor 0 mtrr: base(0xf8000000) is not aligned on a size(0x180000) boundary PCI: Found IRQ 3 for device 00:01.0 PCI: Sharing IRQ 3 with 01:0e.0 bttv0: PLL: 28636363 => 35468950 .. ok tuner: TV freq (0.00) out of range (44-958) bttv0: PLL can sleep, using XTAL (28636363). tuner: TV freq (8.25) out of range (44-958) tuner: TV freq (14.25) out of range (44-958) tuner: TV freq (20.25) out of range (44-958) tuner: TV freq (26.25) out of range (44-958) tuner: TV freq (32.25) out of range (44-958) tuner: TV freq (38.25) out of range (44-958) mtrr: base(0xf8000000) is not aligned on a size(0x180000) boundary PCI: Found IRQ 3 for device 00:01.0 PCI: Sharing IRQ 3 with 01:0e.0 mtrr: base(0xf8000000) is not aligned on a size(0x180000) boundary PCI: Found IRQ 3 for device 00:01.0 PCI: Sharing IRQ 3 with 01:0e.0 mtrr: base(0xf8000000) is not aligned on a size(0x180000) boundary PCI: Found IRQ 3 for device 00:01.0 PCI: Sharing IRQ 3 with 01:0e.0 mtrr: base(0xf8000000) is not aligned on a size(0x180000) boundary PCI: Found IRQ 3 for device 00:01.0 PCI: Sharing IRQ 3 with 01:0e.0 --
