Not totally related, but I've had a good deal of trouble trying to capture from more than one card (and display from one of the cards). I don't get oopses or anything, but the system starts to choke as if the PCI is totally overloaded. (720x480x30) ----- Original Message ----- From: "Michel Bardiaux" <mbardiaux@xxxxxxxxxxx> To: <video4linux-list@xxxxxxxxxx> Sent: Friday, September 26, 2003 11:00 AM Subject: Re: A question about the bandwith? > Johnny Strom wrote: > > Michel Bardiaux wrote: > > > >> Johnny Strom wrote: > >> > > And /proc/meminfo > > total: used: free: shared: buffers: cached: > > Mem: 260653056 256053248 4599808 0 19783680 157757440 > > Swap: 0 0 0 > > 256MB? Then the other suggestion (that the oopses are due to a bad block > in swap) seems much more likely. Logically, if I can do 2x25fps with > 128MB, you should be able to do 4x25fps with 256. > > > Swap is off at the moment it was about 512MB when I got the oopses, > > > > I could try this: bttv card=100,100,100,100 gbuffers=2 but I will wait > > until next week to se if the system is stable with the current > > configuration and with only one card working at a time. > > > > Thanks I will repport back later how it went. > > Yes, please do. > > -- > Michel Bardiaux > Peaktime Belgium S.A. Bd. du Souverain, 191 B-1160 Bruxelles > Tel : +32 2 790.29.41 > > > -- > video4linux-list mailing list > Unsubscribe mailto:video4linux-list-request@xxxxxxxxxx?subject=unsubscribe > https://www.redhat.com/mailman/listinfo/video4linux-list
