Hello! I've clicking noisy sound when I switch a channel or mute/unmute. bye - Stefan My dmesg information: Linux version 2.4.22 (root@dIpSy) (gcc version 3.2.3 20030422 (Gentoo Linux 1.4 3.2.3-r2, propolice)) #2 Fri Aug 29 16:02:28 CEST 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001ffec000 (usable) BIOS-e820: 000000001ffec000 - 000000001ffef000 (ACPI data) BIOS-e820: 000000001ffef000 - 000000001ffff000 (reserved) BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 511MB LOWMEM available. On node 0 totalpages: 131052 zone(0): 4096 pages. zone(1): 126956 pages. zone(2): 0 pages. Kernel command line: vga=791 root=/dev/hda6 Initializing CPU#0 Detected 1678.867 MHz processor. Console: colour dummy device 80x25 Calibrating delay loop... 3348.88 BogoMIPS Memory: 515448k/524208k available (1726k kernel code, 8372k reserved, 648k data, 96k init, 0k highmem) Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode cache hash table entries: 32768 (order: 6, 262144 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383f9ff c1c3f9ff 00000000 00000000 CPU: Common caps: 0383f9ff c1c3f9ff 00000000 00000000 CPU: AMD Athlon(TM) XP 2000+ stepping 02 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@xxxxxxxxxxxxx) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xf1180, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) Disabling VIA memory write queue (PCI ID 0305, rev 03): [55] 89 & 1f -> 09 PCI: Using IRQ router VIA [1106/0686] at 00:04.0 Applying VIA southbridge workaround. Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS version 1.2 Flags 0x0b (Driver version 1.16) Starting kswapd Journalled Block Device driver loaded devfs: v1.12c (20020818) Richard Gooch (rgooch@xxxxxxxxxxxxx) devfs: boot_options: 0x1 Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx). NTFS driver v1.1.22 [Flags: R/O] i2c-core.o: i2c core module i2c-algo-bit.o: i2c bit algorithm module vesafb: framebuffer at 0xdc000000, mapped to 0xe0800000, size 3072k vesafb: mode is 1024x768x16, linelength=2048, pages=1 vesafb: protected mode interface info at c000:ef40 vesafb: scrolling: redraw vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device Real Time Clock Driver v1.10e Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 ne2k-pci.c:v1.02 10/19/2000 D. Becker/P. Gortmaker http://www.scyld.com/network/ne2k-pci.html PCI: Found IRQ 11 for device 00:0c.0 eth0: RealTek RTL-8029 found at 0xa400, IRQ 11, 52:54:05:E5:5D:63. PPP generic driver version 2.4.2 PPP Deflate Compression module registered Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 439M agpgart: Detected Via Apollo Pro KT133 chipset agpgart: AGP aperture is 128M @ 0xe0000000 Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 00:04.1 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:04.1 ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:DMA PDC20265: IDE controller at PCI slot 00:11.0 PCI: Found IRQ 10 for device 00:11.0 PDC20265: chipset revision 2 PDC20265: not 100% native mode: will probe irqs later PDC20265: (U)DMA Burst Bit DISABLED Primary PCI Mode Secondary PCI Mode. ide2: BM-DMA at 0x8000-0x8007, BIOS settings: hde:pio, hdf:pio ide3: BM-DMA at 0x8008-0x800f, BIOS settings: hdg:pio, hdh:pio hda: SAMSUNG SP1203N, ATA DISK drive blk: queue c038f500, I/O limit 4095Mb (mask 0xffffffff) hdc: RICOH CD-R/RW MP7083A, ATAPI CD/DVD-ROM drive hdd: TOSHIBA DVD-ROM SD-M1612, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: attached ide-disk driver. hda: host protected area => 1 hda: 234493056 sectors (120060 MB) w/2048KiB Cache, CHS=14596/255/63, UDMA(100) hdc: attached ide-cdrom driver. hdc: ATAPI 32X CD-ROM CD-R/RW drive, 2048kB Cache, DMA Uniform CD-ROM driver Revision: 3.12 hdd: attached ide-cdrom driver. hdd: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33) Partition check: /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 p7 > SCSI subsystem driver Revision: 1.00 kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 usb.c: registered new driver usbdevfs usb.c: registered new driver hub host/uhci.c: USB Universal Host Controller Interface driver v1.1 PCI: Found IRQ 5 for device 00:04.2 PCI: Sharing IRQ 5 with 00:04.3 PCI: Sharing IRQ 5 with 00:0d.0 host/uhci.c: USB UHCI at I/O 0xd400, IRQ 5 usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected PCI: Found IRQ 5 for device 00:04.3 PCI: Sharing IRQ 5 with 00:04.2 PCI: Sharing IRQ 5 with 00:0d.0 host/uhci.c: USB UHCI at I/O 0xd000, IRQ 5 usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected usb.c: registered new driver hid hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@xxxxxxx> hid-core.c: USB HID support drivers usb.c: registered new driver usblp printer.c: v0.11: USB Printer Device Class driver Linux video capture interface: v1.00 i2c-core.o: driver i2c msp3400 driver registered. tvaudio: TV audio decoder + audio/video mux driver tvaudio: known chips: tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951),ta8874z i2c-core.o: driver generic i2c audio driver registered. i2c-core.o: driver i2c tda7432 driver registered. i2c-core.o: driver i2c tda9875 driver registered. i2c-core.o: driver i2c tda9887 driver registered. i2c-core.o: driver i2c TV tuner driver registered. bttv: driver version 0.7.107 loaded bttv: using 4 buffers with 2080k (8320k total) for capture bttv: Host bridge is VIA Technologies, Inc. VT8363/8365 [KT133/KM133] bttv: Bt8xx card found (0). PCI: Found IRQ 3 for device 00:0a.0 PCI: Sharing IRQ 3 with 00:0a.1 bttv0: Bt878 (rev 2) at 00:0a.0, irq: 3, latency: 32, mmio: 0xdb000000 bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb bttv0: using: BT878(Hauppauge (bt878)) [card=10,autodetected] bttv0: Hauppauge/Voodoo msp34xx: reset line init [5] msp34xx: init: chip=MSP3410D-B4 +nicam +simple msp3410: daemon started i2c-core.o: client [MSP3410D-B4] registered to adapter [bt848 #0](pos. 0). tuner: chip found @ 0xc2 i2c-core.o: client [(tuner unset)] registered to adapter [bt848 #0](pos. 1). i2c-core.o: adapter bt848 #0 registered as adapter 0. bttv0: Hauppauge eeprom: model=61314, tuner=Philips FI1216 MK2 (5), radio=no bttv0: using tuner=5 tuner: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) bttv0: i2c: checking for MSP34xx @ 0x80... found bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found bttv0: PLL: 28636363 => 35468950 .. ok bttv0: registered device video0 bttv0: registered device vbi0 mice: PS/2 mouse device common for all mice NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 96k freed hub.c: new USB device 00:04.2-1, assigned address 2 input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb1:2.0 hub.c: new USB device 00:04.2-2, assigned address 3 printer.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 1 proto 2 vid 0x03F0 pid 0x3002 Adding Swap: 530104k swap-space (priority -1) EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,6), internal journal PCI: Found IRQ 5 for device 00:0d.0 PCI: Sharing IRQ 5 with 00:04.2 PCI: Sharing IRQ 5 with 00:04.3 Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A 0: nvidia: loading NVIDIA Linux x86 nvidia.o Kernel Module 1.0-4496 Wed Jul 16 19:03:09 PDT 2003
