RE: ATI AIW Radeo 7500 V4L Please Help

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



Tux Racer (which I had never tried before) does seem to be excessively slow, so I guess the 3d accelaration does not work. I have no help here.

Lynn

-----Original Message-----
From:	Mauricio Henriquez [mailto:buho-1@xxxxxxxxxxxxxx]
Sent:	Thu 5/22/2003 8:27 PM
To:	video4linux-list@xxxxxxxxxx
Cc:	
Subject:	RE: ATI AIW Radeo 7500 V4L Please Help
Hi Linn:
	Thanks for your xawtv file, now my ati card work perfectly.
	But do you have problem with the 3D hardware aceleration??

	Any idea??

Thanks


On Thu, 2003-05-22 at 17:54, Ziegler, Lynn wrote:
> 
> I have the same board and installed the ATI.2 files from GATOS. I was immediately able to use xawtv. (I did not install km as I was not then interested in video capture, although that is on my projects list.) However, I also installed ATI.2 on another machine with an older All-In-Wonder based on an older chip and it didn't seem to work. Just on a whim, I copied my .xawtv file from my Radeon 7500 machine (which worked) to the other machine and it immediately worked just fine. In case that is your problem, I have attached my .xawtv file here as well. Hope this helps.
> 
> Lynn
> 
> -----Original Message-----
> From:	Mauricio Henriquez [mailto:buho-1@xxxxxxxxxxxxxx]
> Sent:	Thu 5/22/2003 3:10 PM
> To:	video4linux-list@xxxxxxxxxx
> Cc:	
> Subject:	ATI AIW Radeo 7500 V4L Please Help
> Hi:
> 	My name is Mauricio and I write from Chili.
> 	Recently I install RH8 and GATOS drivers for ATI all-in-wonder Radeon
> 7500 and the km modules for have the ati device as video4linux standar
> device. Now I can start xawtv with the /dev/video0 device (previously
> the xawtv software says "/dev/video0" device not found..bla,bla,bla) but
> I can't see any chanel (my country use US NTSC cable), I can hear sound
> from the chanels but I can't see nathing (all video noise), I try
> changed the properties and all but nathing.
> 	Please anyone can help me about how configure correctly the ati for v4l
> standar??
> 
> 	And when I run for the first time my RH8 system I have 3D Hardware
> aceleration working perfectly (I tested with Tux-Racer, but when I
> finish to install the gatos driver I don't have 3D hardware aceleration
> (Tux-Racer is too slow). Any idea???
> 
> Thanks
> 
> 
> 
> --
> video4linux-list mailing list
> Unsubscribe mailto:video4linux-list-request@xxxxxxxxxx?subject=unsubscribe
> https://www.redhat.com/mailman/listinfo/video4linux-list
> 
> 
> 
> 



--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list






[Index of Archives]     [Linux DVB]     [Video Disk Recorder]     [Asterisk]     [Photo]     [DCCP]     [Netdev]     [Xorg]     [Util Linux NG]     [Xfree86]     [Free Photo Albums]     [Fedora Users]     [Fedora Women]     [ALSA Users]     [ALSA Devel]     [Linux USB]

Powered by Linux