Re: issues with webcam

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



I believe its a Divio NW-80[012] chipset - I've got a camera with the same (I think) vend/prod id, which is a Chicony Twinklecam DC2110. There is a driver at http://nw802.sourceforge.net for the chipset, but I've not got it to work with my camera.

Let us know if you have any luck, it might provide some more ideas for the rest of us.

Regards,
Rob

n3ro wrote:

Hi,

i want to use my webcam on my linux box, but as there are no drivers for it (at least i couldn't find any), i want to try it on this mailing list. dmesg tells me on sys-boot:

May 3 16:34:17 sheytan kernel: hub.c: new USB device 00:04.2-2, assigned address 3 May 3 16:34:17 sheytan kernel: usb.c: USB device 3 (vend/prod 0x6a5/0xd800) is not claimed by any active driver.
May  3 16:34:17 goo kernel:   Length              = 18
May  3 16:34:17 goo kernel:   DescriptorType      = 01
May  3 16:34:17 goo kernel:   USB version         = 1.10
May  3 16:34:17 goo kernel:   Vendor:Product      = 06a5:d800
May  3 16:34:17 goo kernel:   MaxPacketSize0      = 64
May  3 16:34:17 goo kernel:   NumConfigurations   = 1
May  3 16:34:17 goo kernel:   Device version      = 1.10
May  3 16:34:17 goo kernel:   Device Class:SubClass:Protocol = 00:00:00
May  3 16:34:17 goo kernel:     Per-interface classes
May  3 16:34:17 goo kernel: Configuration:
May  3 16:34:17 goo kernel:   bLength             =    9
May  3 16:34:17 goo sheytan kernel:   bDescriptorType     =   02
May  3 16:34:17 goo kernel:   wTotalLength        = 00f9
May  3 16:34:17 goo kernel:   bNumInterfaces      =   01
May  3 16:34:17 goo kernel:   bConfigurationValue =   01
May  3 16:34:17 goo kernel:   iConfiguration      =   00
May  3 16:34:17 goo kernel:   bmAttributes        =   80
May  3 16:34:17 goo kernel:   MaxPower            =  300mA

lsmod says:
ov511                  73724   0  (unused)
usb-uhci               23148   0  (unused)

the usbcore support is compiled into the kernel.

As there was no /dev/video0 i created it using: mknod /dev/video0 c 81 0

and i sym-linked it to /dev/video as well.

But as i can see from my dmesg the drivers loadded (ov511) is not the correct one, how could i try getting this cam to work. (It's a Chicony USB Twinkle Cam :( ; i searched the web, no results upon this issue)

Thanks in advance





[Index of Archives]     [Linux DVB]     [Video Disk Recorder]     [Asterisk]     [Photo]     [DCCP]     [Netdev]     [Xorg]     [Util Linux NG]     [Xfree86]     [Free Photo Albums]     [Fedora Users]     [Fedora Women]     [ALSA Users]     [ALSA Devel]     [Linux USB]

Powered by Linux