Dear all, I've already posted on the list last week concerning problems to use a recent model of Pinnacle PCTV Pro. Philippe Cizaire and Balazs Lengyak suggested that I should go with bttv 0.7.106. I'm using a debian testing systems with a vanilla 2.4.20 kernel. That's what I did during the week-end. I can now listen to radio without any problem. The settings I used are card=39 (52 seems to work) and tuner=33, radio=1 However I'm still having problems with TV. Images are considerably distorted. At the beginning I suspected a problem with the TV signal itself, since I live in a mountain area, where it is very common to have "ghosts" on image due to multiple reflections of signal, which sometimes make hard life for tuners. To be sure, I tried the tuner output of a PAL camera, where I observed the same phenomenon. What kind of debugging, component references, information should I post on the list to make some progress with this annoying problem. I should mention that the box on which is installed the card is not mine, so I do not have a permanent access to it and my feedback may be delayed. Thanks in advance for any information, Frederic Tronel.