Dears, I'm trying to get the sound working in my Avermedia AVerTV with the msp34xx Stereo Nicam chip. Since I bought it I haven't been able to get the sound working. I can see perfectly the image with the default configuration. Redhat9 configures it automatically. But no sound. I have tried the configuration some of you send to the list, but I don't get sound neither image: modules.conf ------------ alias usb-controller ehci-hcd alias char-major-81 videodev alias usb-controller1 usb-uhci alias char-major-195 nvidia alias char-major-89 i2c-dev options i2c-core i2c_debug=0 options i2c-algo-bit bit_test=1 alias char-major-81 videodev alias char-major-81-0 bttv options bttv card=6 audiomux=0x0e,0x04,0x08,0x04,0 gpiomask=0x0f options tuner debug=0 type=2 alias sound-slot-0 via82cxxx_audio post-install sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -L >/dev/null 2>&1 || : pre-remove sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -S >/dev/null 2>&1 || : /etc/modules.conf (END) ------------ I'm sure that sound in the general is ok, but I tried to run xawtv with: xawtv -noxv or artsdsp xawtv Xawtv doesn't seem to have problems running but for a fonts warning: This is xawtv-3.81, running on Linux/i686 (2.4.20-8) Warning: Cannot convert string "-*-ledfixed-medium-r-semicondensed--39-*" to type FontStruct My local config is europe-west and PAL. lspci ----------------- 00:08.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 02) Subsystem: Avermedia Technologies Inc AVerTV WDM Video Capture Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at e8001000 (32-bit, prefetchable) [size=4K] 00:08.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 02) Subsystem: Avermedia Technologies Inc AVerTV WDM Audio Capture Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at e8002000 (32-bit, prefetchable) [size=4K] -----------------