I still need to make the following change to the gpiomask to enable sound on my card. It does not work without this line. I found though my previous audio_clock change (to 0x00187de7) was not necessary. I expect it's one single bit of the seven that I've turned on that makes audio work. My next work will be to find out exactly which bit. Cheers, Shaun --- saa7134-cards.c- Tue Apr 8 04:18:26 2003 +++ saa7134-cards.c Tue Apr 8 12:01:06 2003 @@ -108,7 +108,7 @@ .name = "LifeView FlyVIDEO2000", .audio_clock = 0x00200000, .tuner_type = TUNER_LG_PAL_NEW_TAPC, - .gpiomask = 0x6000, + .gpiomask = 0x8018e700, .inputs = {{ .name = name_tv, .vmux = 1, On Mon April 7, 2003 03h41, you wrote: > Gerd, > > My dmesg dump for GPIO detection (FlyVideo 2000, PAL B/G, no FM > radio, no remote, no EEPROM) using Apr 3 snapshot: > > saa7130[0]: found at 00:0b.0, rev: 1, irq: 5, latency: 32, mmio: > 0xe5000000 > saa7130[0]: subsystem: 1131:0000, board: LifeView FlyVIDEO2000 > [card=3,insmod option] > saa7130[0]: flyvideo: gpio is 0x30500 > i2c-core.o: adapter saa7130[0] registered as adapter 0. > saa7130[0]: Huh, no eeprom present (err=-5)? > i2c-core.o: driver i2c TV tuner driver registered. > tuner: chip found @ 0xc2 > tuner: type set to 37 (LG PAL (newer TAPC series)) > i2c-core.o: client [LG PAL (newer TAPC series)] registered to > adapter [saa7130[0]](pos. 0). > > T.C. > ---- > Wan Tat Chee (Lecturer) > School of Computer Science, Univ. Science Malaysia, > 11800 Minden, Penang, Malaysia. Ofc Ph: +604 653-3888 x > 3617 Internet: tcwan@xxxxxxxxx Web: > http://nrg.cs.usm.my/~tcwan GPG Key : > http://nrg.cs.usm.my/~tcwan/tcw_gpg-20030322.asc F'print : DCF2 > B9B2 FA4D 1208 AD59 14CA 9A8F F54D B2C4 63C7